PolyQuest and Hyperio Balance Lead Consolidator for E-Station Chargers - Bantam CSEAC143  [CSEAC143]

BANTAM MULTI-LIPO BALANCE ADAPTOR BOARD (POLYQUEST/HYPERIO) FOR E-STATION BC5/BC6/BC6-10/PB6 #EAC143
Price:
£4.05
Brand:
Bantam
Model:
CSEAC143
Condition:
Brand New
Write a review

Balance lead consolidator for multiple LiPo packs

The Bantam CSEAC143 adaptor board is built to accept PolyQuest and Hyperio style balance leads and present them to E-Station charger balance ports, including BC5, BC6, BC6-10 and PB6. It provides a tidy interface when you need to balance or charge several LiPo packs using a single charger balance connection.

Installation involves plugging each pack's balance lead into the corresponding socket on the adaptor, then connecting the adaptor to the charger's balance port. Always confirm the cell count on the charger and visually inspect connector polarity before initiating charging; the board is an intermediary harness and does not alter charger configuration requirements.

In regular use the adaptor streamlines setup and reduces wear on charger sockets by limiting repeated connector swapping, while keeping balance wiring organised for testing or routine maintenance.

Compatibility list

  • PolyQuest balance plugs
  • Hyperio balance plugs
  • E-Station BC5
  • E-Station BC6
  • E-Station BC6-10
  • PB6

What should I do if the charger reports an incorrect cell count?

First check that the correct balance socket on the adaptor is used and that the connector is fully seated. Inspect for bent pins or debris and verify the charger settings match the pack's cell count before proceeding.

Is this adaptor suitable for repeated daily use?

Yes, provided you maintain clean, secure connections and avoid stressing the sockets. The low-loss contacts are intended for routine hobby charging, but damaged or loose sockets should be replaced to preserve safe performance.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved