Precision M4 Titanium Wheel Nuts HUDY 296542 Serrated Flange (4 pcs)  [HSP-296542]

HUDY 296542 - Titanium NUT M4 With Serrated Flange (4)
Price:
£19.30
Brand:
HUDY
Model:
HSP-296542
Condition:
Brand New
Write a review
alt="HUDY 296542 - Titanium NUT M4 With Serrated Flange (4)" title="HUDY 296542 - Titanium NUT M4 With Serrated Flange (4)"

Precision M4 Titanium Wheel Nuts

This HUDY titanium M4 serrated flange nut set is an RC-scale wheel fastening item supplied as a set of 4 pcs, intended for models that use M4 threaded wheel mounts. The serrated flange increases contact against the wheel surface to resist gradual loosening from vibrations typical in club and track driving.

Use these nuts when you need a corrosion-resistant, long-life fastening that keeps weight down compared with heavier materials. They are ideal for regular track use where reliable wheel retention is important.

Fitting requires standard wheel-service practice: screw the nut onto the M4 stud, make sure the flange sits flat against the wheel or adapter, and tighten carefully until the serrations lock. Do not exceed manufacturer torque limits to protect threads and hub components.

Specifications

  • Item: Titanium NUT M4 With Serrated Flange (4 pcs)
  • Material: Titanium
  • Model Number: 296542
  • Compatibility: RC wheels and hubs using M4 threaded studs

A small but effective upgrade for M4-threaded wheel fittings where preventing loosening and resisting corrosion are priorities for serious RC drivers.
Remark :
Due to limited stock availability, please notice that some HUDY items may have to order from the factory and the ready time is around 8-12 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

What vehicles typically use M4 wheel nuts?

Many 1/10 and similar scale RC cars use M4 studs for wheel attachment. Check your hub specification to confirm compatibility.

Is the set sold individually or in multiples?

This listing supplies four nuts per pack. Purchase multiple packs if replacing nuts across all four corners of a vehicle.

Can I mix these with existing nuts on the car?

Mixing materials is possible, but it's best practice to match nut type across an axle to ensure consistent seating and torque response.

Do these require special thread treatment?

No special treatment is required. Fit as standard and check periodically. If you use thread locker, choose a low-strength grade and apply sparingly to avoid altering serration engagement.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved