Precision Steering Blocks (Left & Right) for B-MAX4 III - YOKB4-415S by Yokomo [YOKB4-415S]

Yokomo B4-415S - B-MAX4 III Steering Block (Left & Right)

Price:

£7.06

Brand:

Yokomo

Model:

YOKB4-415S

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the

Spares / Hop-ups - Yokomo - B-Max4

Steering knuckle set for precise front-end setup

The Yokomo YOKB4-415S left and right steering blocks are made to fit the B-MAX4 III chassis for front-end servicing and steering refinement. They concentrate on the interfaces that seat wheel hubs and attach to suspension links for RC touring cars.

Installation notes: remove stock blocks one at a time, retain serviceable bearings and hardware, and confirm bearing preload plus link alignment during refit. These parts control toe, caster and ackermann; ensure correct left/right placement and check servo horn and steering stop clearance before final tightening.

Tuning guidance: use these blocks during staged setup changes. Check toe under static conditions, then observe dynamic steering response and alter steering link lengths for the ackermann you want. Re-inspect tie-rods and kingpins after a few runs to keep steering consistent.

Remark :

Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will the YOKB4-415S fit without modifying the B-MAX4 III chassis?

Yes, the set is produced to match the stock steering geometry and installs in place of the original knuckles on B-MAX4 III chassis.

Can I use different tie-rods or links with these blocks?

Yes. You can fit alternative link hardware to alter steering geometry, but make progressive changes and check for binding or clearance issues after adjustments.