Pro Boat Miss Illinois U-34 Turn Fin Support Plate PUH024 for PRB2072T1 by GPM  [PUH024]

PROBOAT MISS ILLINOIS U-34 - PRB2072T1 Carbon Fiber Turn Fin ReinfoRCement Plate - GPM PUH024
Price:
£6.73
Brand:
GPM
Model:
PUH024
GTIN:
4894538416985
Condition:
Brand New
Write a review
alt="PROBOAT MISS ILLINOIS U-34 - PRB2072T1 Carbon Fiber Turn Fin ReinfoRCement Plate - GPM PUH024" title="PROBOAT MISS ILLINOIS U-34 - PRB2072T1 Carbon Fiber Turn Fin ReinfoRCement Plate - GPM PUH024"

Turn fin support plate

This 2.5mm carbon fibre reinforcement plate is an RC-scale replacement that stiffens the turn fin on Pro Boat Miss Illinois U-34 PRB2072T1 hulls, helping limit bending and deformation where the fin fastens.

Specifically intended for the 34-inch Miss Illinois U-34 PRB2072T1 hull layout; confirm your fin mounting geometry before fitting. The plate mounts at the existing fin attachment location and is shaped to accept the original hardware pattern, improving the mounting surface for the turn fin.

Contents of the kit: 1 pcs turn fin reinforcement plate, 2 pcs stainless steel cap head screws 3x18. Fit using the correct hex driver and apply moderate torque to avoid compressing the carbon laminate.

Compatible hulls

  • Pro Boat 34-inch Miss Illinois U-34-PRB-2072T1

Is the plate universal across Miss Illinois variants?

No. This item is cut for the 34-inch U-34 PRB2072T1 fin layout. Other variants may have different hole spacing or fin geometry, so confirm dimensions before attempting to use it elsewhere.

What maintenance should I perform after use?

After each session rinse with fresh water, inspect the screw holes for fretting or wear, and ensure screws remain tight but not over-torqued to preserve the carbon structure.

Can I replace the screws with alternative fasteners?

The kit uses 3x18 stainless cap head screws; if you substitute, choose equivalent diameter and length fasteners and maintain proper countersink seating to avoid stress concentrations.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved