RACE OPT 64P Spur Gear 112T POM - Precision 112T Spur Gear  [RO-SG64112]

RACE OPT 64P Spur Gear , 112T (POM)
Price:
£4.16
Brand:
RACE OPT
Model:
RO-SG64112
Condition:
Brand New
Write a review

Precision gearing with the RACE OPT 64P Spur Gear 112T

The RACE OPT 64P Spur Gear 112T POM features a 112-tooth 64P profile produced in POM, offering steady tooth geometry for 1/10 on-road applications. It is a practical choice when you need repeatable gear ratios for lap-to-lap consistency.

Material strengths of POM

POM provides a combination of dimensional stability and low surface friction that helps gears keep form under load. Those characteristics support reliable meshing and reduced wear in regular track use.

Practical fitting advice

This spur is aimed at 64P systems; confirm your pinion pitch and space for the gear before installation. Proper mesh adjustment and secure mounting will give the best balance of efficiency and longevity.

Verify that your pinion is also 64P and that the shaft spacing allows for correct mesh. Inspect the gear faces for moulding defects and set a small, consistent tooth clearance when installing.
POM is a common choice for competitive on-road gearing due to its balance of strength and low friction. It performs well in many race environments when maintained and fitted correctly.
Check the spur after heavy sessions or if you change gear ratios frequently. Look for tooth wear, play at the hub, and any changes in drivetrain noise that could signal replacement is needed.
Altering the tooth count changes the gear ratio, which impacts acceleration and top speed. Use tooth changes alongside motor and gearing choices to dial in lap times.
Set a precise mesh, avoid overtightening bearings, and run the car briefly at low load after fitting to seat the gear. Slightly polishing mating gear faces can sometimes reduce noise as well.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved