RADTEC RAD-AC-10010 3x5.5x1.0mm Titanium Finish Aluminium Spacer Set 10 Pack  [RAD-AC-10010]

RAD-AC-10010 3x5.5x1.0mm Aluminum Spacer, 10 pcs, Titanium
Price:
£5.23
Brand:
RADTEC
Model:
RAD-AC-10010
Condition:
Brand New
Write a review

Precision Shims from RADTEC for RC Setup

The RADTEC 3x5.5x1.0mm aluminum spacers are an effective solution when you need exact gaps or alignment on model cars. The ten-piece titanium-finish set is handy for making measured changes during setup and maintenance.

Useful for Handling and Clearance Adjustments

These aluminium spacers combine minimal mass with practical durability, useful for tweaking handling balance, ride height, and link positions. They are a simple way to dial in small differences on test runs.

Compatible with Multiple Mounting Points

They suit any location that calls for a 3x5.5x1.0mm shim, from wheel hubs to suspension linkages. Their generic sizing makes them a versatile addition to a parts drawer for racers and weekend builders alike.

How do I check if these spacers will change my track width?

Fit a spacer at the hub location and measure across the wheels before and after. The 1.0mm thickness can subtly alter track width, so test one change at a time.

Are these suitable for use with metal drives or plastic hubs?

They work with both metal and plastic components as long as the dimensions match. Take care with torque and mating surfaces to avoid crushing softer materials.

Can these spacers be used as a permanent fix for wear issues?

Spacers can mask minor wear by tightening fit, but they are not a repair for badly worn parts. Replace damaged components where appropriate and use spacers for fine tuning.

What maintenance do these spacers need?

Keep them clean and inspect for deformation. Wipe off grit and check fit regularly during a race day or club session to avoid unexpected play.

Is stacking multiple spacers acceptable for larger adjustments?

Stacking is acceptable for incremental changes but watch total stack height and fastener engagement. Ensure the fastener still threads sufficiently into the mating part.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved