RAD-AC-20006 Ultra-Fine Chassis Droop Gauge by RADTEC for Pancar  [RAD-AC-20006]

RAD-AC-20006 Ultra-Fine Chassis Droop Gauge (-2.6-0mm) for Pancar
Price:
£9.61
Brand:
RADTEC
Model:
RAD-AC-20006
Condition:
Brand New
Write a review

Precision droop checking for competitive Pancar setups

Serious hobbyists and club competitors can rely on the RADTEC RAD-AC-20006 Ultra-Fine Chassis Droop Gauge to check Pancar suspension with accuracy. The tool covers a droop range of -2.6mm to 0mm, helping you lock in repeatable settings.

Why accurate droop matters

Using a purpose-made gauge for Pancar measurements reduces variables that affect balance and handling. The fine graduations support incremental setup changes that translate directly to on-track feel.

Practical setup workflow

Include the RADTEC gauge in your standard setup routine to verify changes after swapping tyres, shock oil or spring rates. Small droop adjustments can be the difference between understeer and a neutral balance.

Will this gauge handle different ride heights?

The RADTEC RAD-AC-20006 focuses on droop measurement rather than ride height. It will work alongside ride height checks but is not a ride height gauge itself.

Can I document settings for future runs?

Yes. Record droop values you measure with the gauge so you can replicate setups between meetings and compare results under different track conditions.

Is calibration needed?

The gauge is ready to use, but inspect for any bends or wear before relying on readings. Store it carefully and check against a known reference if you suspect drift.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved