RADTEC RAD-BA-10023 190mm High Downforce Rear Wing Ver. 3 (0.7mm) - Circuit Performance Wing  [RAD-BA-10023]

RAD-BA-10023 190mm High Down Force Rear Wing Set, Ver. 3 (0.7mm), Light Weight
Price:
£6.37
Brand:
RADTEC
Model:
RAD-BA-10023
Condition:
Brand New
Write a review

Improve Circuit Handling with RADTEC RAD-BA-10023 Rear Wing

The RADTEC RAD-BA-10023 190mm High Down Force Rear Wing Set Ver. 3 (0.7mm) is aimed at drivers seeking a tidy aero upgrade for on-road performance. The thin 0.7mm element produces additional rear downforce to help maintain stability through corners and reduce unwanted oversteer.

Form and Function for On-Road Use

Developed for 1/10 scale on-road cars, the 190mm width offers effective airflow management across the rear of the car to increase tyre contact. Lightweight construction helps preserve vehicle balance while providing the extra traction needed for confident cornering at speed.

Compatibility and Fitting Notes

Fitting the RADTEC wing is generally straightforward, using standard wing posts and mountings. It is compatible with most common 1/10 on-road chassis platforms, giving modelers a flexible option for aero tuning without major bodywork changes.

Will this wing reduce understeer or oversteer?

The wing increases rear downforce which typically reduces oversteer by keeping the rear planted; understeer is less affected and may require other setup changes.

Is trimming the wing material recommended?

Minor trimming can be used to fine tune balance, but test carefully as removing material will lower downforce and change handling characteristics.

How does the 0.7mm thickness compare to heavier wings?

At 0.7mm the wing offers a lightweight option with sufficient stiffness for on-road use; heavier wings may add more downforce but also increase mass and affect balance.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved