RADTEC RAD-XR-10002 2.0mm Rear Graphite Arm Stiffeners for XRAY T4-2014 2 pcs [RAD-XR-10002]

RAD-XR-10002 T4-2014 2.0mm Rear Graphite Arm Stiffners, 2 pcs

Price:

£9.75

Brand:

RADTEC

Model:

RAD-XR-10002

Condition:

Brand New

Quantity:

Write a review

Description
FAQ

Precision Rear Arm Support for T4-2014

If you run an XRAY T4-2014, the RADTEC 2.0mm rear graphite arm stiffeners are a focused upgrade to cut arm flex and stabilise handling. The plates reinforce critical areas so suspension geometry remains more constant under load.

Key Details

Material: Quality graphite chosen for stiffness and low mass
Thickness: 2.0mm to provide firm support without excessive harshness
Compatibility: Designed specifically for the XRAY T4-2014 chassis
Package Includes: Two rear arm stiffener units

Practical Race Notes

These stiffeners are aimed at drivers who need predictable rear behaviour when pushing limits. By limiting unwanted arm deformation, they help the car maintain its set-up through braking and cornering, which is useful during qualifying and race stints.

Will the stiffeners fit without trimming?

They are produced to match the T4-2014 arm layout, so in most cases no trimming is required. Always test-fit and ensure screws do not protrude into moving parts.

Can these be used with upgraded arms?

If upgraded arms keep the original mounting geometry, the plates should work. If the replacement arms alter hole positions or clearances, modifications may be necessary.

How do I check for damage after a crash?

Inspect for hairline cracks or delamination in the graphite and replace any plates that show structural damage to avoid unexpected failures.

Do these stiffeners affect rear toe or camber?

They do not change static toe or camber settings, but by reducing flex they can make effective dynamic toe and camber behaviour more repeatable.

Hot Brands