RADTEC RAD-YK-10009 Aluminium Suspension Mount 46mm Club Racing Edition  [RAD-YK-10009]

RAD-YK-10009 Aluminum Suspension Mount for BD7-2015, 46mm
Price:
£9.00
Brand:
RADTEC
Model:
RAD-YK-10009
Condition:
Brand New
Write a review

Stiffen Your Yokomo BD7-2015 with a RADTEC Aluminium Mount

Club racers and tuners who want steadier handling on the Yokomo BD7-2015 will find the RADTEC Aluminium Suspension Mount a sensible upgrade. It focuses on improved alignment control while resisting long term wear.

Key Benefits of Aluminium

The RADTEC mount is formed from durable aluminium to reduce flex seen in plastic originals. That stiffer mounting point helps preserve suspension geometry, which in turn aids predictable steering and tyre wear.

Designed to Match BD7-2015 Geometry

The 46mm sizing is chosen for compatibility with the BD7-2015 chassis so it fits as a direct replacement. Installation is straightforward using common RC hand tools, allowing a quick return to testing or competition.

Does the mount require shims for proper alignment?

In most BD7-2015 setups the mount installs without extra shims. If you run a custom suspension stack you may need thin shims to fine tune toe or camber settings.

Will switching to aluminium affect durability?

Yes, aluminium generally lasts longer than plastic under repeated stress, reducing the chance of deformation or cracking over time.

Any setup advice after fitting?

After fitting, check toe and camber at the track and make small adjustments to dampers if required. The stiffer mount can change handling balance slightly, so test in controlled runs.

Is the part compatible with aftermarket arms?

Compatibility depends on the arm mounting pattern. If the aftermarket arms match BD7-2015 mounting points the RADTEC mount should work, otherwise check dimensions before fitting.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved