RC scale Dark Yellow (Sandy Yellow) Mr.Hobby GSI-S39 Mr. Color Spray aerosol paint  [GSI-S39]

Scale body spray for model finishers

The Mr.Hobby GSI-S39 aerosol arrives ready to apply and is suited to scale RC modelling where a sandy dark yellow finish is required. It works best when applied in thin, overlapping passes so the colour builds uniformly on the small panels and accessories typical of model bodies.

Do proper prep: clean off oils and dust, lightly abrade existing paint or primer where needed, and mask windows and trims. Trial-spray onto scrap material to verify adhesion and exact shade prior to painting the final component.

Apply multiple thin coats rather than one heavy pass to minimise runs and pooling. Keep the can in motion at a constant range, allow short drying intervals between layers, and treat edges and recesses carefully to protect fine detailing. Remove low-tack masking after initial seal coats for clean lines.

Safety and storage notes: spray in a ventilated area, avoid inhalation, and keep cans upright and away from heat. Dispose of empty cans in line with local regulations and test batches when matching colour across different production runs.