RD/SD/MD Compatible Aluminum Front Steering Block RD-415SABL by Yokomo  [RD-415SABL]

Yokomo RD-415SABL jp
Price:
£76.26
Brand:
Yokomo
Model:
RD-415SABL
GTIN:
639342231188
Condition:
Brand New
Write a review
alt="Yokomo RD-415SABL jp" title="Yokomo RD-415SABL jp"

Aluminium upgrade for precise front-end alignment

This aluminium front steering block is a straightforward RC upgrade compatible with Yokomo RD, SD and MD series drift chassis. The assembly splits the axle, steering block and upper holder so each piece can be serviced or replaced independently.

Trail and kingpin angle adjustments are made using the supplied shim set, letting you fine-tune steering geometry without changing the main casting. Compared to the factory resin axle assembly, the aluminium version increases rigidity and refines steering response, aiding front tyre tracing during rapid direction changes.

The component is intended for alignment-focused tuning: careful trail and kingpin changes help tailor steering character for surfaces where small geometry differences have a large effect. It maintains a scale appearance and is for RC drift applications only.

Specifications

  • Item Front steering block assembly
  • Material Aluminum
  • Model Number RD-415SABL
  • Compatibility RDR-010, RDR-010G, RDR-020, RDR-020G, SDR-010, SDR-020, SDR-030, SDR-030BL, MDR-020, MDR-020BL, MDR-030, MDR-030BL, MDR-030LM, DP-RS13SP, DP-FCBN

For owners aiming for tighter steering precision and repeatable front tyre lines on technical drift tracks, this aluminium steering block offers an effective upgrade with broader adjustment capability for RD/SD/MD chassis.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Does this fit the older SDR chassis revisions?

Yes. The RD-415SABL is listed as compatible with SDR-010, SDR-020 and SDR-030 variants; confirm your chassis revision against the Compatibility list before ordering to ensure a perfect fit.

What should I check after installation for correct alignment?

After fitting, verify shim placement, kingpin angles and trail measurements, then perform a track test to confirm turn-in and mid-drift behaviour. Make small incremental shim changes until desired steering feel is achieved.

Is extra hardware required to mount this block?

No additional proprietary hardware is normally required; the unit uses the standard mounting points and hardware common to the listed RD/SD/MD chassis. Reuse appropriate bearings and fixings from the original assembly as directed.

Can I revert to the resin assembly if I prefer the original feel?

Yes. Because the aluminium assembly is serviceable and direct-fit, you can reinstall the original resin axle assembly if you decide to return to the factory steering characteristics.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved