Rod End Adapter 15mm for Lower A-Arm with Narrow Steering Block - Yokomo YOKD154-15 [YOKD154-15]

Yokomo D154-15 - Rod End Adpter 15mm for Lower A Arm with Narrow Steering Block (Drift Pack)

Price:

£5.25

Brand:

Yokomo

Model:

YOKD154-15

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
Spares / Hop-ups - Yokomo - DP category

Write a review

Description
FAQ

Overview: Lower A-Arm Adapter

The Yokomo YOKD154-15 is a 15mm aluminium rod end adapter intended for lower A-arms that use a narrow steering block, typically supplied with drift kits.

Designed to either extend or replace the lower ball end to reach 15mm, the adapter enables tuners to alter toe and roll-centre without changing the arm's inherent geometry. It is specified where a narrow steering block requires a matched rod end offset.

To fit it, remove the original ball end from the lower A-arm linkage, attach the adapter to the rod or linkage, and fasten with the correct screw or nut for your chassis. Once installed confirm steering full lock and suspension travel and inspect for binding points.

Maintenance note: after initial track use re-check fasteners and alignment, as small toe or roll-centre changes have outsized effects on 1/10 drift cars; make progressive adjustments and test between runs.

Remark :

Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

What is the adapter made from and how durable is it?

Manufactured from aluminium for strength and light weight, the adapter withstands normal drift stresses but should be checked regularly for wear if used aggressively.

How often should I inspect the part after installation?

Inspect hardware and linkage movement after the first few runs and during routine maintenance; ensure nothing loosens and alignment remains within desired parameters.