Yokomo RS-301AS Aluminium Suspension Mount Set for RS1.0/2.0 Tunable Rear Toe  [RS-301AS]

Yokomo RS-301AS Aluminum suspension mount set for RS1.0/2.0
Price:
£60.03
Brand:
Yokomo
Model:
RS-301AS
GTIN:
639342228737
Condition:
Brand New
Write a review
alt="Yokomo RS-301AS Aluminum suspension mount set for RS1.0/2.0" title="Yokomo RS-301AS Aluminum suspension mount set for RS1.0/2.0"
alt="Yokomo RS-301AS Aluminum suspension mount set for RS1.0/2.0" title="Yokomo RS-301AS Aluminum suspension mount set for RS1.0/2.0"
alt="Yokomo RS-301AS Aluminum suspension mount set for RS1.0/2.0" title="Yokomo RS-301AS Aluminum suspension mount set for RS1.0/2.0"

Control and Consistency for Setups

The Yokomo RS-301AS Aluminium Suspension Mount Set is suited to model racers seeking repeatable tuning on RS1.0 and RS2.0 chassis. The machined aluminium part is aimed at delivering consistent alignment under race conditions.

Interchangeable Bushings for Rear Toe Settings

Equipped with precision plastic bushings, the RS-301AS lets you select rear toe angles by swapping bushing types. The two bushing options provide choices of 2.5, 3.0 and 3.5 degrees so you can fine tune handling for a variety of track surfaces.

Compatibility Notes and Build Quality

This suspension mount is compatible with the Yokomo RSR-020, RSR-010 and RSR-010-1 chassis and keeps the standard mounting width to preserve geometry. The aluminium construction enhances durability and delivers stable mounting for frequent adjustments.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Is the RS-301AS straightforward to fit on the RSR series?

Yes, it installs using the existing mounting points on RSR-020, RSR-010 and RSR-010-1 chassis and maintains the stock width for a direct fit.

How do I choose between the toe settings?

Try 3.0 degrees as a baseline, move to 2.5 for livelier turn-in or 3.5 for more mid corner stability depending on grip and tyre choice.

Any maintenance items to watch for?

Check the bushings and aluminium mating surfaces periodically for wear and clean any debris to keep toe settings accurate.

Will I need to change other suspension parts when fitting this mount?

In most cases no, but verify your existing hardware condition and replace worn bolts or bushings to ensure secure installation and correct geometry.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved