Sanwa RX461 - Performance 4-Channel FHSS-4T Receiver  [SW-RX461]

Sanwa RX461 2.4G Receiver
Price:
£45.99
Brand:
Sanwa
Model:
SW-RX461
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

High Response Receiver Sanwa RX461

The Sanwa RX461 4-Channel 2.4GHz FHSS-4T Surface Receiver is intended for modellers who require predictable, accurate control. It is compatible with the Airtronics MT-4 transmitter and supplies fast response plus telemetry for useful live readings.

Performance Features and Telemetry

With Sanwa Super Response (SSR) built in, the RX461 lowers latency and supports a higher update rate for crisp control inputs. Telemetry capability gives real-time information to help you fine tune handling or motor setup.

Input Voltage and Battery Compatibility

This receiver operates on a nominal voltage of 4.8V to 7.4V, so use 4 to 6 cell Ni-Cd/Ni-MH batteries or 2S Li-Po and 2S A123/Li-Fe packs. A 3S Li-Po is not supported and should not be connected.

Specifications

  • Frequency: 2.4GHz FHSS4
  • Channels: 4
  • Nominal Input Voltage: 4.8~7.4V
  • Binding: One-Touch Binding
  • Antenna: Single Receiver Antenna
  • Fail Safe: Programmable on All Channels
  • Connector Type: Universal 'Z'
  • Dimensions: 1.43 x 1.04 x 0.64in (36.2 x 26.5 x 16.3mm)
  • Weight: 9.6g (0.34oz)

The Sanwa RX461 is a lightweight, telemetry-capable receiver well suited to model racers and anyone wanting tight, responsive control.

What transmitters are compatible with the RX461?

The RX461 is compatible with Airtronics systems such as the MT-4. Always confirm compatibility and binding steps in your transmitter manual before attempting to pair.

Will telemetry affect control latency?

Telemetry itself does not significantly increase input latency thanks to SSR and the RX461's high frame rate. Telemetry simply provides live data while maintaining responsive control.

How do I reduce interference with other electronics?

Keep the receiver and antenna away from heavy current wiring, motors and ESCs. Use ferrite clamps on power leads if needed and secure the receiver with foam to minimise vibration and electrical noise.

Can I use different connector types with the RX461?

The RX461 uses the Universal 'Z' connector type for servos and devices. Adapters may be used if your gear requires a different plug, but ensure secure connections to avoid intermittent signals.

Is the antenna included when measuring receiver dimensions?

No. The listed dimensions are for the receiver body only and do not include the antenna length. Allow extra space in your radio bay for the antenna routing.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved