Savox SH-0255MG Micro Metal Gear Digital Servo - Precision Aluminium Body  [SH-0255MG]

Savox SH-0255MG Micro Metal Gear Digital Servo
Price:
£28.91
Brand:
Savox
Model:
SH-0255MG
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="Savox SH-0255MG Micro Metal Gear Digital Servo" title="Savox SH-0255MG Micro Metal Gear Digital Servo"

Precision in a small frame: Savox SH-0255MG micro servo

The Savox SH-0255MG Micro Metal Gear Digital Servo delivers accurate control in a compact footprint, ideal for park flyer aeroplanes and 450 class helicopters. The aluminium housing gives extra rigidity and cooling while the metal gear train improves resistance to wear.

Consistent control from inspected components

High quality plastic parts combined with careful assembly checks help the SH-0255MG sustain reliable centring and travel over time. Production practices also take environmental considerations into account.

Specifications

  • External size: 22.8x12.0x29.4 mm
  • Mass: 15.8 g
  • Response Speed: 0.16 sec/60° @ 4.8V, 0.13 sec/60° @ 6.0V
  • Available Torque: 43.1 oz-in @ 4.8V, 54.2 oz-in @ 6.0V
  • Gear Type: Metal
  • Bearing Setup: 1 Ball Bearing
  • Casing: Aluminum
  • No Load Current: 180 mA @ 4.8V, 240 mA @ 6.0V
  • Stall Current: 1200 mA @ 4.8V, 1400 mA @ 6.0V
  • Idle Current: 5 mA @ 4.8V/6.0V
  • Travel Limit: 220° ± 10°
  • Connector Wire: #26 AWG
  • Lead Length: 250 ± 5 mm
  • Horn Spline: 21T
  • Signal: Pulse Width Modulation
  • Controller: Digital
  • Operating Travel: 90° (1000 to 2000 usec)
  • Neutral: 1500 usec
  • Dead Band Width: 5 usec
  • Rotation Direction: Clockwise (1500 to 2000 usec)
  • Pulse Width Range: 750 to 2250 usec
  • Maximum Travel: Approx. 145° (750 to 2250 usec)

Savox SH-0255MG suits flyers who require compact, metal-geared servos that provide steady, predictable control in small to medium model aircraft.

What aircraft types suit the SH-0255MG?

It is well matched to park flyers and 450 size helicopters for cyclic and control surfaces where a compact servo is required.

How should I set endpoints and centring?

Use your transmitter or a servo tester to fine tune endpoints and centre position; start with small trims then test control throws before full flight.

Are spare horns and screws standard sizes?

Yes, the servo uses common micro servo horn splines (21T) and standard mounting hardware, making replacements and upgrades straightforward.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved