Schumacher FT9 Rear Right Hub Plate +1mm Graphite - Factory Pro O-SCP041R  [FP-O-SCP041R]

Key Info

This aftermarket steering hub plate is produced for the Schumacher FT9 and is intended for the rear right position with a +1mm offset. Machined from graphite, the part is supplied as one piece for replacement or tuning work on FT9 touring cars.

Why you might fit it: the +1mm change repositions the steering mount to tweak rear steering behaviour and vehicle balance; fit it when testing handling changes or to replace a worn hub plate. It is made for radio control applications and matches the FT9 hub interface.

Installation advice: remove the rear hub and check the new plate against the original for fit, ensure bearings are correctly seated and threads engage properly, then tighten using the original fasteners and the correct hex driver. Avoid over-tightening and check for free rotation of the hub and wheel after fitting.

• Position: Rear right (RR)
• Offset: +1mm to steering mount
• Material: Graphite
• Quantity: 1pc
• Designed for: Schumacher FT9 chassis