Schumacher Mi10 Compatible Main Chassis Graphite 2.25 - O-SCP042 by Factory Pro  [FP-O-SCP042]

Price:
£34.25
Brand:
Factory Pro
Model:
FP-O-SCP042
Condition:
Brand New
Write a review

Product Summary: O-SCP042 for Schumacher Mi10

The Factory Pro O-SCP042 is an aftermarket main chassis made for the Schumacher Mi10 platform, available as the Graphite 2.25 option plate. It is presented as a replacement main chassis intended for hobbyists who prefer a graphite plate over the original material.

Designed to match the Mi10 mounting pattern, this chassis retains the platform attachment points and layout so it fits with existing Schumacher Mi10 kit architecture. The Graphite 2.25 designation identifies the material construction and thickness selected by Factory Pro for this option component.

In handling terms, a graphite main chassis can influence torsional stiffness and on-track feedback; drivers use such a plate to fine tune the compromise between corner bite and mid-corner stability on a variety of surfaces. The part is for scale RC use and not for full-size vehicles.

Specifications

  • Item Option Main Chassis - Graphite 2.25
  • Material Graphite 2.25
  • Model Number O-SCP042
  • Compatibility Schumacher Mi10

As an aftermarket replacement, the Factory Pro O-SCP042 supplies a Graphite 2.25 option to modify chassis stiffness and handling characteristics for the Schumacher Mi10 platform, providing a useful tuning item for drivers focused on setup adjustments.

Does the O-SCP042 fit older and newer Mi10 kit revisions?

The chassis is produced to the standard Mi10 mounting layout; however, confirm your kit revision mounting points before purchase to ensure complete interchangeability.

Are electronic and drivetrain clearances preserved?

Factory Pro designs the plate to align with Mi10 layout so typical servo, battery and drivetrain clearances are maintained, although individual setups should be checked after fitment.

Will this require alternative braces or supports?

Because the O-SCP042 matches the platform attachment points, most braces and supports should remain compatible; some drivers choose to adjust ancillary parts when optimising balance.

What should I inspect after installation?

After fitting the Graphite 2.25 plate check all mounting screws, look for any fitment gaps, and run a setup test to assess how the change affects handling on your preferred surface.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved