Schumacher Mi10/Mi9/Mi8 HGT Front split upper deck graphite 1.6 O-SCP043S by Factory Pro  [FP-O-SCP043S]

Price:
£9.18
Brand:
Factory Pro
Model:
FP-O-SCP043S
Condition:
Brand New
Write a review

What the front split upper deck does for Schumacher Mi10 cars

An aftermarket front split upper deck made for Schumacher Mi10 family models, produced in graphite 1.6 to influence front chassis stiffness and assist balance tuning. It is not intended to modify electronic or drive components.

Fitment and use: the deck mounts at the front shock tower and is shaped to use the factory screw locations on the Schumacher Mi10/Mi9/Mi8 HGT chassis range. Installation normally makes use of the stock hardware unless the chassis manual indicates otherwise.

Tuning notes: a graphite 1.6 upper deck increases front rigidity which can sharpen initial turn-in and alter mid-corner balance; adjust suspension and sway bar settings progressively to reach the handling balance you require.

Compatibility

  • Schumacher Mi10
  • Schumacher Mi9
  • Schumacher Mi8 HGT

Can I replace my original upper deck with this part without altering the chassis?

In most cases yes. The product is made to match the stock attachment points for the specified Schumacher chassis, allowing a direct swap in standard configurations.

How does switching to graphite 1.6 change on-track behaviour?

Switching to a stiffer graphite panel typically tightens turn-in and shifts balance through the corner. Plan for small, iterative setup changes to dampers and anti-roll bars to regain the desired handling feel.

Are there any chassis variants where extra checks are recommended?

While it fits the listed variants, check shock tower and servo clearance after fitting, especially on custom builds or where non-standard hardware has been used.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved