Scorpion SPS3008MSK 5mm Shaft Kit Compatible with S-3008 Series  [SPS3008MSK]

SCORPION S-3008 SERIES OUTRUNNER MOTOR SHAFT KIT 5MM SHAFT
Price:
£3.38
Brand:
Scorpion
Model:
SPS3008MSK
Condition:
Brand New
Write a review

Service replacement for S-3008 shafts

The Scorpion SPS3008MSK shaft kit provides a replacement component for Scorpion S-3008 series outrunner motors. It is specified for the 5mm shaft size used on these series to correct issues from worn or bent shafts.

For installation, remove the endbell, check bearings and rotor journals for damage, fit the SPS3008MSK shaft, and reassemble while checking axial play and bearing alignment. Correct rebuild technique minimizes vibration and helps bearings last longer.

Once fitted, perform a free-spin check and confirm pinion or pulley alignment before use. This listing covers the single shaft component for hobby motor maintenance and does not promise extra hardware included.

What are the basic installation steps for this shaft?

Remove the motor endbell, extract the old shaft, inspect bearings and rotor surfaces, press the SPS3008MSK into place, and reassemble while checking for smooth rotation and correct axial play.

How do I confirm there is no binding after replacement?

After reassembly, spin the rotor by hand to feel for resistance; use a dial indicator or visual reference to detect wobble, and adjust bearing seat if any binding or wobble appears.

Is any special tooling required to fit the shaft?

Basic press tools or bearing drivers are recommended for straight seating of the SPS3008MSK; avoid hammering directly on bearings or journals to prevent damage.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved