SCX10 II 92mm L-shape Aluminium Shock Pair for Scale Crawling - SCX2092F/R/L by GPM  [SCX2092F/R/L]

92mm L-shape aluminium shock absorbers for SCX10 II

This pair of aluminium L-shape shocks is produced as an aftermarket replacement for AXIAL Racing SCX10 II scale crawlers, specified at 92mm length for front or rear L-type mounting. It is an RC-scale suspension component intended to match the SCX10 II mounting geometry without implying any real-vehicle application.

The L-shape configuration shifts the shock eye position in comparison to straight-body shocks and is typically used to clear specific chassis or body brackets on modified SCX10 II vehicles. When installing, confirm front and rear orientation and use the provided hardware to mount the shocks to the shock towers and lower mount points. Use careful torque control to avoid damaging threads in plastic mounts.

Tuning overview: these aluminium bodies act as fixed-length housings for springs, pistons and shock oil choices; aluminium enhances heat transfer versus plastic and creates a firmer mounting surface. Achieving the required damping and ride height still depends on spring rate, piston selection, oil viscosity and preload adjustments for scale trail or technical rock crawling.

Included hardware and parts are supplied for direct replacement: Aluminium collars 3x6x1 - 2pcs, 3x6x2 - 2pcs, 3x6x3 - 2pcs, stainless steel button head screws 3x16 - 2pcs, 3x20 - 2pcs.

For scale builders and rock crawlers running AXIAL Racing SCX10 II, these GPM aluminium L-shape shocks provide a robust replacement that works with common tuning variables; use matched springs and oils to reach the behaviour you need on trail and technical sections.