Serpent has released S411 190mm Ready-to-race in 1/10 R/C Models AWD drivetrain RTR (Ready-to-Run) under Electric Powered On-Road Touring Cars category
Serpent 190mm 1/10 scale ready-to-Race Touringcar, based on the effective 411 race-cars. Factory assembled, with race-wheel-tyres, pre-cut and prepainted human body, Dragon-RC electronic speedo, Dragon-RC brushless 9T engine, Dragon-RC DTS-1 2.4ghZ transmitter. The complete package to start rushing in the electric touringcar category or perhaps competition anywhere for enjoyable.
Specs:
- Course: 1/10th scale 190mm Electric
- Function: 190mm touring vehicle
- Chassis: 2.5mm cup dietary fiber, CNC machined
- Suspension: Front C-Hub suspension system system system system
- Rear axle: straight back gear- differential
- Front axle: Front nylon spool
- Drive system: 4wd through 2 kevlar strengthened timing belts
- Shock absorbers: RCM surprise absorbers
- Wheel base: 254mm +/- 4mm
- Track-width front component: 190mm /- 6mm
- Track-width backside: 190mm /- 6mm
- Adjustability: Camber, Caster, Up-Down-stops, Toe-in, width & Roll centres
- Guidelines: complete color instructions, reference guide
- Included: engine, rate Controller, tires, human anatomy, radio gear.
- Not included: Battery Lipo and 4 x AA battery pack for radio, charger
Features:
Chassis
Supernarrow, symmetrical , durable black colored colored glass-fibre chassisplate with optimised flex design, countersunk holes, primary component holes all perfectly in center, pockets for geardiff, spool and spur.
Topdeck
Durable black colored glass-fibre topdeck with optimised flex design.
Battery-mount brackets and Lipo-holders
easy to use nylon batter tape owner, which allow the battery tape to perform over instead of in framework. The holders are reversed for almost any other electric batteries place. The Lipoholders will securely keep consitently the Lipo in position, also at hard effect.
Servo-mount
The servo is mounteded on another meal, so flex is less impacted.
Shocktower front part
Ebony glass fibre shocktower with 3 top shock mounting holes available . Holes for a supplementary main bodypost are already made also.
Front side bracket
Machined aluminium front part brackets, with gear stress adjusting through excenters. Suspension brackets in durable nylon.
Front suspension system system
Durable reduced front part wishbones connected to the interior brackets with strong metal pivot pins. An anti-roll club system could possibly be create as choice.
C-hub / steeringblock
The c-hub type front part system produces an excellent accurate steering feeling with great feedback, and strong wheelguidance without chatter.
Shocktower back
Black cup soluble fbre shocktower with 4 top surprise mounting holes available . The trunk bodyposts are put up near the top of right back shocktower.
Backside bracket
Machined aluminium back brackets, with gear stress adjusting through excenters. Suspension brackets in durable nylon with 3.0 RR RR and split kind 0.0 obstructs RR FR
Straight back suspension
Durable paid down back wishbones with this inside brackets with strong metal pivot pins. An anti-roll club system could be set up as option.
Back upright
Strong backside uprights with 2 top jobs, for perfect guidance of back wheels.
Motormount
Machined aluminium motormount / center shaft assistance.
Center shaft
Ballraced center shaft with 2 little pully?s as well as the primary Serpent spur gear.
Bumper
Big foam front side bumper captured by a premier and paid off nylon bumper
Bodymount
Front bodymount is established through front bumper, together with straight back individuals are seated about the shocktower. Multiple bodyposiiton holes available.
Gear-diff
Extremely lightweight ballraced geardifferential in the back, with steel gears and axles for durablity. Supersmooth.
Spool
Front nylon lightweight spool with screw mounted front gearpulley
Transmission / belts / pulleys
Smooth low friction fine pitch belts alongside optimised nylon pulleys
Driveshaft / wheelhex / wheelaxle
metal driveshafts, along with ballraced wheelaxles and nylon wheel-hex adaptors
Steering system
Steering system with optimised ackermann for fundamental steering-feeling.
Shockabsorbers
Latest sort RCM competition shockabsorbers with membranes and checked colorcoded competition springs.
Ball-bearings
completely ballraced with oiled higher level sealed stainless bearings.
Tyres-wheels
The 411-RTR has Dragon-RC synthetic rushing tyres with foam inlays on Serpent TC wheels for super-grip.
Body
The EFRA approved 1/10 scale Serpent TC body Lex-is fitted, fully pre-cut and prepainted in an excellent paintjob with 4 colors.
Electronics
The 411 RTR includes Dragon-RC electronic 35A speedcontroller, Dragon-RC non sensored brushless motor 9T 3000 kv, Dragon-RC DTS-1 electronic 2.4 gHz pistol-typetransmitter with big LCD display, Dragon-RC electronic receiver in 2.4 gHz and Dragon-Rc electronic servo 0.13s - 6kg.
Optionals / updating
The Serpent 411 Sport is founded on the most truly effective end competition form of the 411. All elements from 411 race-version and in addition all optionals, in addition fit the 411 Sport. This enables anyone to boost your 411 Sport to a greater degree battle spec action by action, with the components you choose. The 411 Sport parts manual shows those components, and you can see them inside optionals area of the 411 Sport and.
