SER600038 Serpent Cobra MT-e RTR 1/8 [SER600038]

Price:

£385.89

Brand:

Serpent

Model:

SER600038

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
R/C Models - Off-Road - Trucks category

Write a review

Description

Serpent has released Cobra MT-e in 1/8 R/C Models AWD drivetrain RTR (Ready-to-Run) under Off-Road Trucks category

Vehicle
totally expert pre put together and pre-set framework and electronics.

Transmitter
DragonRc 2.4 GHz tyre kind transmitter with lots settings and good range. Includes little and light receiver.

Speedo
DragonRC waterproof rate controller with a huge 150A capability getting a handle in the brushless motor and 4S power packs

motor
DragonRC long human anatomy 1940kV brushless engine with effortless color coded connectors

Body
Prepainted and pre-cut Monster vehicle human body.

Tyres/wheels
Premounted oversized tyres/wheels good quality profile for amazing hold.

Chassis
incredibly slim 3mm 7075T6 aluminium framework, with machining regarding upper face rendering it lighter in strategic places also to control flex. Kick-up front part for appropriate landings. Angled component to boost cornering clearance, and safe and easy mounting component guards with 5 screws. Countersunk holes. Generally the Monster Truck was made to help keep very carefully the fat severely central and towards the centerline as possible, to create an excellent general balance.
Side guards / battery power trays
Durable shaped composite immense component guards / battery pack trays that continue utilizing the type of the chassis, and mount with 5 screws each component. Front and sides enough to hold the dust away. The guards/trays create some security. The batteries are installed in longitudinal fashion, keeping the excess weight suprisingly lower in the car. The battery power trays features user-friendly Serpent noticeable felcron TM straps to secure the batteries constantly in place. Fits 2S and 3S batteries.

Motormount
The motor is put in a lot of optimal place in automobile, maintaining motor-forces and transmission components / alignment at heart. Simply one-screw is required to secure the BL engine, in to the nicely developed durable machined aluminium motormount. Room for extra motor-cooling available as required. The location the engine allows mounting all popular buggy and monster car machines.

Composite chassis braces
Allows the framework to flex which assists enhance bump control. Front and backside.

Front bumper system
The durable composite front side part bumper system will need in the worst of at the same time crashes and certainly will permit save yourself nose landings

Rear bumper
The rear bumper area is a tremendously durable product, super easy to disassemble, and fits well combined with the backside the human body, to soak up the worst of back-end crashes.
front component suspension system
long and durable composite reduced wishbones, alongside top spring-steel trackrods. 2 lower shock-mount roles. Downstops may be used as needed.

Front steering / servo saver / angled
Revolutionary angled front side steering arranged to minimize the angle of distinction between the total caster and steering airplane. Consequently you have to have less bump steer and a truer steering Ackerman through the entire collection of suspension system.

Adjustable springtime packed servo-saver system with interchangeable Ackermann meals. Aided by the design of steering bell cranks whenever changing the Ackerman you will not need certainly to adjust your steering tie rods. A breeze to find yourself in and set-up.

The Inboard Bell crank keeps the lever and linkage in the car. It will help aided by the avoidance of injury to the steering system. Zero scrub radiuses on steering knuckle, assists in reducing the jacking impact generated by your steering knuckle offset. It gives a much more direct fell while maintaining the vehicles framework more level while turning.

the main element roll center is changed quickly by going the steering knuckle shims with regards to their appropriate places.

Topped down with a powerful composite top-plate.

Front steering-block/c-hubs
actually durable front side steeringblock/c-hub installation.
Drive-shafts
much longer and lightweight spring steel services and products with forced in steel pins, laser-engraved. Same size front and rear.

Wheel-axles / wheel-nut
Serpent spring steel wheel-axles with grey anodized aluminium wheel hex-adaptors and aluminium wheel-nuts to help keep the massive monster vehicle wheels/tyres on system.

Captured universal joints
Guarantees you need to finish a race without losing a pin or set screw. All components, axles and drive train elements have actually capture pins

Front shocktower
Light, strong and durable machined 4mm aluminium units with 3 jobs for shockangle and 4 jobs for the camberlink.

Shock-set front part and back
24mm big bore shocks, with hard anodized precision threaded shock-bodies. Chromed shock-shafts for supersmooth shockaction. The more expensive o bands offer less basic force and a better seal without dragging regarding surprise shaft.
Suspension brackets
The hinge-pins have already been around in durable composite suspension system brackets fully guaranteed with c-clips.

Receiver package / servo mount / speedo install
Composite one piece radiobox to securely install the servo, speedo and receiver. For optimum balance the light receiver fits the top-case effortless, with a few opening allowing cable to protrude. The speedo seats low on a plate right above the framework, for this reason fast cables enables you to the engine. The servo is installed in a vertical fashion.

Central diff
Optimized central gear-diff with 52T super-hard spur-gear. Tiny, compact design to reduce rotating mass toward optimum.

Transmission shafts
Durable but light and slim Serpent springtime steel, laser engraved shafts.

Front and rear diff
Optimized gear-diff with superhard diff-gears. Tiny, compact design to cut back rotating mass toward optimum same variation front component and rear. Diff coupler in springtime metal seated in big bearings for durability.
right back shocktower
Light, strong and durable machined 4mm aluminum product with 3 roles for shockangle and 4 jobs the camberlink.

Straight back uprights
Durable composite straight back uprights with 3 camber jobs

suspension system system brackets rear
The hinge-pins have already been around in durable composite suspension system brackets guaranteed in full with c-clips .

Bodymounts
Nylon bodymounts with wider sitting your body, firmly fastened towards the shocktowers.
Decals
placed on the body.

Natural oils / oil
vehicle is assembled with a high quality silicone sebum the diffs and shocks and black colored oil. Threadlock used where needed.
Manual
Full color manual shows the car, specifications, guidelines and exploded views. The transmitter and speedo have really little separate manuals included.

Box
color protective package to re-use for car transport or tyres.
The RTR package is truly dialed:
- factory built rushing framework
- prepainted and precut Monster automobile body
- premounted oversized tyres/wheels/inserts
- pre-set 4S capable waterproof 150A speedo ( DragonRC)
- 1940kv brushless long human body engine (DragonRC)
- electronic 2.4ghz transmitter (DragonRC)
- metal gear servo 17kg ( DragonRC-Savox)
- 3 oil filled gear differentials
- Big bore shocks and machined aluminium shocktowers
- springtime metal transmission elements and turnbuckles, front side and back cvd driveshaft’s
- huge battery-cases with effortless felcron straps
- Machined aluminium framework plate
- completely ballraced
- Batteries the car and transmitter are not included

Serpent provides numerous optional components because of this car to improve performance, lighter and even for also nicer appearance.

Hot Brands

SER600038 Serpent Cobra MT-e RTR 1/8 [SER600038]