SER600039-O Serpent Serpent Cobra E-Truggy RTR Orange  [SER600039-O]

Serpent SER600039-O Serpent Cobra E-Truggy RTR Orange
Price:
£418.58
Brand:
Serpent
Model:
SER600039-O
Condition:
Brand New
Write a review
Serpent has released Cobra E- Orange in 1/8 R/C Models AWD drivetrain RTR (Ready-to-Run) under Electric Powered Off-Road Truggy category

  • Introduction

    The Serpent Cobra E-Truggy in RTR trim is an ideal basher kind car which could just take countless beating and its furthermore an amazing package to begin genuine battle ! Based on the Cobra E-Truggy oahu is the outright rate, great control, reliability, rigidness and durability you need.

    The RTR package is obviously dialed:
    -factory assembled rushing chassis
    -prepainted and precut low kind truggy human anatomy and large composite rear wing
    -premounted truggy tyres/wheels/inserts
    -pre-set 4S to 6S capable waterproof 150A speedo ( DragonRC)
    -2000kv brushless longbody motor (DragonRC)
    -Digital 2.4ghz transmitter (DragonRC)
    -Metal gear servo 16kg ( DragonRC-Savox)
    -3 oilfilled geardifferentials
    -Big bore shocks with plastic dustboots and machined aluminium shocktowers
    -Spring steel transmission parts and turnbuckles, front and right back cvd driveshafts
    -Front and right back anti-roll bars
    -Large battery-cases with effortless felcron straps
    -Machined aluminium chassisplate
    -Fully ballraced
    -Batteries the automobile and transmitter are not included

    The bodyshell will come in orange, red, green, blue and red, including an evident kind.

    Serpent offers numerous optional elements this is why automobile to improve performance, lighter and also for furthermore nicer appearance.

  • Main features

    Car
    Fully expert pre built and pre-set framework and electronic devices.

    Transmitter
    DragonRc 2.4 GHz steeringwheel sort transmitter with lots settings and good range. Includes small and light receiver.

    Speedo
    DragonRC waterproof speedcontroller with a huge 150A ability to regulate the brushless engine and 4S or 6S battery pack power

    Motor
    DragonRC longbody 2000kV brushless motor with effortless colorcoded connectors

    Body
    Prepainted and pre-cut low e-Truggy human anatomy, in 4 main colors orange, red, Green and Blue. ( additionally clear one available as optional)

    Tyres
    Premounted battle prepared tyres / tires with soft substances and pintype profile for amazing grip.

    Chassis
    Very narrow 3mm 7075T6 aluminium framework, with machining concerning the top face making it lighter in strategic places also to control flex. Kick-up front component for appropriate landings. Angled aspect of improve cornering approval, and safe and simple mounting part guards with 5 screws. Countersunk holes, pouches to put the suspension system brackets. In general the Truggy is made to help to keep the fat really primary and towards the centerline that you can, in order to make a fantastic basic safety.

    Side guards / battery power trays
    Durable shaped composite part guards / battery trays that carry on with all the number of the framework, and mount with 5 screws each part. Front and edges sufficient to help keep the dirt away. The guards/trays create countless security. The batteries are installed in longtudinal fashion, maintaining the extra fat suprisingly low to your vehicle. The battery trays features user-friendly Serpent noticeable felcron TM straps to secure the batteries in place. Fits 2S and 3S batteries.

    Motormount:
    The engine is place in most optimal destination in the vehicle, keeping motor-forces and transmission components / positioning in your thoughts. Simply one-screw is important to secure the BL motor, to the nicely designed durable machined aluminium motormount. Put for additional motor-cooling available as needed. The space the engine permits mounting all popular buggy and (monster)truggy motors.

    Composite framework braces
    Allows the framework to flex which assists enhance bump control. Front and rear.

    Front bumper
    Nicely curved front part bumper, just like into the Cobra buggy, to guard the best anti-roll club, suspension system system system brackets, and flows inline with kick-up framework front side for safe landings.

    front part suspension
    Very long and durable composite lower wishbones, in conjunction with upper spring-steel trackrods. 2 paid off shock-mount functions. Downstops can be used as required. Pivotball kind anti-roll club rods.
    .
    Front steering / servo saver / angled
    Innovative angled front component steering setup to attenuate the angle of distinction between your amount total caster and steering airplane. Consequently you should have less bump steer and a truer steering Ackerman through the entire selection of suspension.

    Adjustable springtime stuffed servo-saver system with interchangeable Ackermann dishes. With the design from the steering bell cranks whenever changing the Ackerman you won't must adjust your steering tie rods. You simply will nevertheless only need to adjust your end points in your radio.. fairly simple to get involved with and set-up.

    The Inboard Bell crank keeps the lever and linkage in vehicle. It helps in preventing injury to the steering system. Zero scrub radiuses on steering knuckle, assists in easing the jacking effect developed by your steering knuckle offset. It provides a far more direct dropped while maintaining the automobiles chassis more level while turning.

    The front roll center are changed quickly by going the steering knuckle shims making use of their appropriate locations.

    Topped of with a decent composite top-plate.

    Front steering-block / c-hubs
    Very durable front part steeringblock / C-hub installation .

    Drive-shafts
    very long and lightweight springtime steel devices with forced in metal pins, laser-engraved. Exact same size front part and rear.

    Wheel-axles / wheel-nut
    Serpent springtime metal threaded wheel-axles with lightweight grey anodised aluminium wheel-nuts to help keep the massive truggy wheels/tyres on program.

    Captured universal joints
    Guarantees you should complete a race without loosing a pin or set screw. All elements, axles and drive train elements have actually capture pins

    Front shocktower
    Light, strong and durable machined 5mm aluminium services and products with 5 jobs for shockangle.

    Shock-set front part and rear
    16mm big bore shocks, with difficult anodized precision threaded shock-bodies. Shockboots in silicone synthetic to keep the dirt away . Chromed shock-shafts for supersmooth shockaction . The bigger o bands offer less general force and a greater seal without dragging into the surprise shaft.

    Suspension brackets
    The hinge-pins / hingepin balls are captured in durable composite suspension system brackets . These capture the nylon roll-center inserts.

    Anti-roll club / anti-roll club linkage with pivotball
    The anti-roll pubs front and back are made of high-quality unique spring metal, and are additionally captured regarding diff-cased in ballbearing for perfect guidance and control.

    Receiver package / servo mount / speedo mount
    Composite one piece radiobox to securely install servo� s, speedo and receiver. For optimum security the light receiver fits the top-case effortless, with a tiny opening permitting cable to protrude. The speedo seats low on a plate just above the chassis, therefore quick cables enable you to the motor. The servo is installed in a vertical fashion.

    Central diff
    Optimised primary gear-diff with 50T super-hard spur-gear . Small, compact design to scale back rotating mass on max.

    Transmission shafts
    Durable but light and slim Serpent springtime metal, laser etched shafts.

    front side and straight back diff
    Optimised gear-diff with superhard spur-gears . Smaller, compact design to minimize rotating mass on maximum. Very same version front part and right back. Diff coupler in springtime metal seated in big barings for durability.

    Rear shocktower
    Light, strong and durable machined 5mm aluminum item with 5 functions for shockangle.

    Rear uprights
    Durable composite back uprights with 3 camber positions

    Suspension brackets rear
    Durable composite devices with eccentric inserts to boost set-up.

    Rear wing mount
    The composite back wing mount, allows to boost the angle related to straight back wing.

    Rear wing
    Two period high down force wing, has two degrees of angle, which also includes 2 fins. Helps improve down force and right line capability

    Bodymounts
    Nylon bodymounts with wider sitting the body, securely fastened on shocktowers.

    Super Minimal profile e-Truck Body
    Improves look including keeps the profile minimum. Comes precut and prepainted.

    Decals
    Applied towards body.

    Oils / grease
    Car is created with a high quality silicone oils the diffs and shocks and black colored colored oil. Threadlock employed in which needed.

    Manual
    Full color manual showing the automobile, specifications, directions and exploded views. The transmitter and speedo have actually in fact in fact tiny split manuals included.

    Box
    Full color protective package to re-use for car transportation or tyres.





Copyright © 2008-2024 rcjaz.co.uk All rights reserved