SER600039-R Serpent Serpent Cobra E-Truggy RTR red  [SER600039-R]

Serpent SER600039-R Serpent Cobra E-Truggy RTR red
Price:
£426.12
Brand:
Serpent
Model:
SER600039-R
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
R/C Models - Off-Road - Truggy - Electric Powered category
Write a review
Serpent has released Cobra E- red in 1/8 R/C Models AWD drivetrain RTR (Ready-to-Run) under Electric Powered Off-Road Truggy category

  • Introduction

    The Serpent Cobra E-Truggy in RTR trim is a superb basher kind vehicle which will simply take numerous beating and its particular additionally outstanding package to start with genuine battle ! On the basis of the Cobra E-Truggy oahu is the outright price, great management, dependability, rigidness and durability you need.

    The RTR package is actually dialed:
    -factory come up with racing chassis
    -prepainted and precut low sort truggy body and big composite rear wing
    -premounted truggy tyres/wheels/inserts
    -pre-set 4S to 6S capable waterproof 150A speedo ( DragonRC)
    -2000kv brushless longbody motor (DragonRC)
    -Digital 2.4ghz transmitter (DragonRC)
    -Metal gear servo 16kg ( DragonRC-Savox)
    -3 oilfilled geardifferentials
    -Big bore shocks with artificial dustboots and machined aluminium shocktowers
    -Spring steel transmission elements and turnbuckles, front part and rear cvd driveshafts
    -Front and straight back anti-roll bars
    -Large battery-cases with effortless felcron straps
    -Machined aluminium chassisplate
    -Fully ballraced
    -Batteries the automobile and transmitter aren't included

    The bodyshell comes into play orange, red, green, blue and red, also an evident type.

    Serpent provides many optional elements with this particular car to boost performance, lighter or even for additionally nicer looks.

  • Main features

    Car
    Fully expert pre come up with and pre-set framework and electronic devices.

    Transmitter
    DragonRc 2.4 GHz steeringwheel kind transmitter with lots settings and good range. Includes little and light receiver.

    Speedo
    DragonRC waterproof speedcontroller with a giant 150A capacity to get a handle on the brushless motor and 4S or 6S battery power power

    Motor
    DragonRC longbody 2000kV brushless motor with effortless colorcoded connectors

    Body
    Prepainted and pre-cut low e-Truggy human body, in 4 main colors orange, red, Green and Blue. ( additionally clear one available as optional)

    Tyres
    Premounted battle ready tyres / tires with soft substances and pintype profile for amazing grip.

    Chassis
    Very slim 3mm 7075T6 aluminium framework, with machining regarding top face making it lighter in strategic areas and to control flex. Kick-up front for appropriate landings. Angled part to boost cornering approval, and safe and simple mounting part guards with 5 screws. Countersunk holes, pouches to position the suspension brackets. Broadly speaking the Truggy was created to keep consitently the fat actually primary and towards the centerline as possible, to create a fantastic general stability.

    Side guards / battery power trays
    Durable shaped composite component guards / battery power trays that carry on with all the current distinct the chassis, and mount with 5 screws each component. Front and sides adequate to put on the dirt away. The guards/trays create numerous security. The batteries are set up in longtudinal fashion, maintaining the weight low inside vehicle. The battery pack trays features easy to use Serpent noticeable felcron TM straps to secure the batteries in position. Fits 2S and 3S batteries.

    Motormount:
    The engine lies in the many optimal spot inside car, keeping motor-forces and transmission elements / alignment in your head. Simply one-screw is required to secure the BL motor, inside ripped durable machined aluminium motormount. Region for additional motor-cooling available as required. The area the motor allows mounting all popular buggy and (monster)truggy motors.

    Composite framework braces
    Allows the framework to flex which assists enhance bump managing. Front and rear.

    Front bumper
    Nicely curved front bumper, the same as about the Cobra buggy, to guard the important thing anti-roll club, suspension system system system brackets, and moves inline with kick-up framework front for safe landings.

    front part suspension
    Very long and durable composite lower wishbones, coupled with upper spring-steel trackrods. 2 reduced shock-mount jobs. Downstops works extremely well as required. Pivotball kind anti-roll club rods.
    .
    Front steering / servo saver / angled
    Innovative angled front part steering create to lessen the angle of distinction between the whole total caster and steering airplane. Therefore you will have less bump steer and a truer steering Ackerman through the entire selection of suspension.

    Adjustable springtime packed servo-saver system with interchangeable Ackermann dishes. As a result of design for this steering bell cranks whenever changing the Ackerman may very well not should adjust your steering tie rods. You merely only will need to adjust your end points all on your own radio.. fairly simple getting using and set-up.

    The Inboard Bell crank keeps the lever and linkage to the car. It will advice about preventing injury to the steering system. Zero scrub radiuses on steering knuckle, assists in easing the jacking effect manufactured by your steering knuckle offset. It offers an even more direct fallen while maintaining the cars framework more degree while turning.

    The front roll center is changed quickly by going the steering knuckle shims with regards to their appropriate locations.

    Topped of with a good composite top-plate.

    Front steering-block / c-hubs
    Very durable front component steeringblock / C-hub construction .

    Drive-shafts
    very long and lightweight springtime steel items with pressed in metal pins, laser-engraved. Identical size front component and rear.

    Wheel-axles / wheel-nut
    Serpent springtime steel threaded wheel-axles with lightweight grey anodised aluminium wheel-nuts to hold the huge truggy wheels/tyres on program.

    Captured universal joints
    Guarantees you will complete a race without loosing a pin or set screw. All elements, axles and drive train elements have actually capture pins

    Front shocktower
    Light, strong and durable machined 5mm aluminium products with 5 roles for shockangle.

    Shock-set front part and rear
    16mm big bore shocks, with difficult anodized accuracy threaded shock-bodies. Shockboots in silicone synthetic to hold the dust away . Chromed shock-shafts for supersmooth shockaction . The larger o bands provide less basic anxiety and a better seal without dragging regarding shock shaft.

    Suspension brackets
    The hinge-pins / hingepin balls are captured in durable composite suspension system brackets . These capture the nylon roll-center inserts.

    Anti-roll club / anti-roll club linkage with pivotball
    The anti-roll pubs front and straight back are constructed with quality unique springtime steel, and are also captured on diff-cased in ballbearing for perfect guidance and control.

    Receiver field / servo mount / speedo mount
    Composite one piece radiobox to firmly install servo� s, speedo and receiver. For maximum security the light receiver fits the top-case effortless, with a tiny opening to allow cable to protrude. The speedo seats suprisingly low on a plate right above the framework, for that reason fast cables enables you to the engine. The servo is set up in a vertical fashion.

    Central diff
    Optimised main gear-diff with 50T super-hard spur-gear . Tiny, compact design to reduce rotating mass on max.

    Transmission shafts
    Durable but light and thin Serpent spring steel, laser etched shafts.

    front part and straight back diff
    Optimised gear-diff with superhard spur-gears . Small, compact design to cut back rotating mass towards many. Identical variation front component and backside. Diff coupler in springtime steel seated in big barings for durability.

    Rear shocktower
    Light, strong and durable machined 5mm aluminum product with 5 positions for shockangle.

    Rear uprights
    Durable composite straight back uprights with 3 camber positions

    Suspension brackets rear
    Durable composite services and products with eccentric inserts to boost set-up.

    Rear wing mount
    The composite back wing mount, permits to alter the angle towards straight back wing.

    Rear wing
    Two duration high down force wing, has two levels of angle, which also includes 2 fins. Helps improve down force and right line capability

    Bodymounts
    Nylon bodymounts with wider seating the human body, securely fastened on shocktowers.

    Super Minimal profile e-Truck Body
    Improves appearance and keeps the profile minimum. Comes precut and prepainted.

    Decals
    Applied towards body.

    Oils / grease
    Car is assembled with a high quality silicone sebum the diffs and shocks and black oil. Threadlock present which needed.

    Manual
    Full color manual showing the car, specs, suggestions and exploded views. The transmitter and speedo have actually in fact small split manuals included.

    Box
    Full color protective industry to re-use for automobile transportation or tyres.

Copyright © 2008-2024 rcjaz.co.uk All rights reserved