Serpent SER214017 1/10 Front Buggy Tyre Mounted on White Rim Medium Tread  [SER214017]

Serpent SER214017 1/10 buggy Tyre mounted on white rim 2wd front med
Price:
£0.00
Brand:
Serpent
Model:
SER214017
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Ready-Mounted Front Tyre for 2wd 1/10 Buggies

This Serpent SER214017 tyre is supplied mounted on a white 1/10 rim for front use on 2wd buggies and is presented as an RC-scale accessory. The medium tread pattern offers a balance between grip and longevity suitable for club circuits and regular practice.

Because the tyre arrives pre-mounted, installation is reduced to wheel attachment and a bead seating verification. Confirm that the wheel fits your front hex size and check centring to avoid unwanted steering bias.

Performance note: front tyres strongly influence turn-in and steering predictability. Using a medium tread front tyre tends to stabilise initial steering; fine adjustments to toe and roll center will refine handling without immediate tyre changes.

Does this tyre require any preparation before use?

Minimal prep is needed. Fit the wheel to your front hex, then inspect and seat the bead if necessary. A short test run will show if any additional seating is required.

Which wheel hex sizes are compatible?

It is intended to work with standard 1/10 front hex sizes used on most 2wd buggies; verify your model's hex measurement before fitting to ensure proper retention.

Will swapping front tyres improve understeer or oversteer?

Changing front tyre compound or tread affects turn-in. A harder or medium tread can reduce bite and tame oversteer, but consider setup changes first to address handling balance.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved