Serpent 401354 Performance Carbon Chassis 1/10  [SER401354]

Serpent SER401354 Chassis Carbon 2.5mm
Price:
£50.88
Brand:
Serpent
Model:
SER401354
Please kindly input your name and email address, we will inform you once we have the restocking.
Write a review

Upgrade Your 1/10 with Serpent 401354 2.5mm Carbon

The Serpent 401354 is a 2.5mm carbon fibre chassis plate made for 1/10 scale cars aiming for improved on-track consistency. The design reduces flex and helps drivers maintain a predictable balance through braking and cornering phases.

How Carbon Alters Handling

By raising torsional stiffness, carbon fibre lets suspension geometry remain stable under load, which improves feedback and steering accuracy. The Serpent 401354 supports setup refinement and repeatable lap times when tuned correctly.

Practical Installation Tips

Use correct-length screws and washers to avoid crushing the composite and re-check all fittings after initial runs. Keep an eye on any burrs or micro-cracks and service the Serpent 401354 as part of routine maintenance.

Is the Serpent 401354 easy to fit to popular 1/10 kits?

Many kits accept aftermarket plates but mounting patterns differ. Check hole spacing and battery tray layout before fitting the Serpent 401354 to ensure compatibility.

What torque should I use on the fixings?

Hand-tighten initially then use a low torque setting to avoid crushing the carbon. Small increments and thread-lock on metal threads are recommended for secure mounting.

Does the chassis change tyre wear?

Improved chassis stiffness can alter load distribution and so influence tyre wear profiles; expect some changes and adjust camber and toe to compensate after fitting the Serpent 401354.

How does it perform in damp conditions?

Carbon itself is unaffected by moisture, but setup adjustments may be needed for reduced grip. Check for any debris and dry the chassis after wet running to prevent grime build up.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved