Serpent 411055 Front Spring Kit - 0.45mm Touring Car Springs  [SER411055]

Serpent SER411055 Front Spring 0.45mm (2)
Price:
£5.24
Brand:
Serpent
Model:
SER411055
Condition:
Brand New
Write a review

Refine Front-End Balance with Serpent Springs

The Serpent 411055 Front Spring Set is a practical upgrade for 1/10 touring chassis that need crisper front response. With a 0.45mm wire gauge, these springs reduce unwanted roll and help the car rotate more cleanly through corners. They are a useful tool when chasing consistent handling over a race day.

Reliable Rates for Setup Work

Serpent has designed these springs to provide repeatable spring rates under normal use. The 0.45mm thickness offers a good compromise so drivers maintain traction while getting clearer steering inputs.

Installation Pointers

Fitting the Serpent 411055 Front Spring Set is quick with basic tools; clean the shock internals and seat the springs squarely to prevent binding. Check free length and test rebound after assembly to confirm correct operation.

How long do these springs usually last?

Lifespan depends on use and storage, but under normal club use springs should remain consistent for many sessions; replace if coils show wear or length changes.

Should I change shock oil when swapping springs?

It is good practice to review shock oil when changing spring rates, as oil viscosity affects damper response and helps match the new spring characteristics.

Any tools recommended for fitting?

Basic shock tools, spring compressors and a clean workbench are all you need. A setup station or calipers help verify ride height and free length after fitting.

Can I paint these springs?

Painting is possible but may change coil surface friction; if you coat them, use a thin, even finish and retest setup to ensure no binding occurs.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved