Serpent 500228 3.5lbs Purple Front Springs for SRX2  [SER500228]

Serpent SER500228 Shock Spring Purple 3 5lbs Front (2) SRX2
Price:
£5.55
Brand:
Serpent
Model:
SER500228
Please kindly input your name and email address, we will inform you once we have the restocking.
Write a review

Boost SRX2 Front Control with Serpent 500228

Those wanting more precise steering from their SRX2 can fit the Serpent 500228 front spring set. These 3.5lbs springs offer firmer support up front to reduce roll and improve turn-in consistency.

How the 3.5lbs Springs Affect Handling

Serpent springs are made to complement SRX2 suspension geometry, providing steady travel and predictable rebound. They suit drivers looking to tighten cornering without making the car too nervous on exits.

Installation Pointers for Reliable Results

Fit the Serpent 500228 springs after cleaning shock internals and checking shaft straightness. Match preload on both sides and perform short test runs to fine tune ride height and corner balance.

Will a stiffer front spring reduce understeer?

A firmer front spring like 3.5lbs can reduce body roll and improve turn-in, which may lessen understeer. Balance with rear settings to avoid oversteer.

Do I need to change shock oil with these springs?

You might tweak shock oil viscosity to suit the firmer springs. Heavier oil slows rebound, which can complement a stiffer spring rate for consistent behaviour.

How do I measure spring preload correctly?

Set preload collars so there is no binding at full droop and ride height matches your baseline setup. Compare left and right measurements to ensure symmetry.

Are the springs coated or treated?

The purple finish aids visual ID and resists minor corrosion, but avoid exposing springs to solvents and keep them clean for long service life.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved