SER600039-B Serpent Serpent Cobra E-Truggy RTR Blue  [SER600039-B]

Serpent SER600039-B Serpent Cobra E-Truggy RTR Blue
Price:
£408.04
Brand:
Serpent
Model:
SER600039-B
Condition:
Brand New
Write a review
Serpent has released Cobra E- Blue in 1/8 R/C Models AWD drivetrain RTR (Ready-to-Run) under Electric Powered Off-Road Truggy category

  • Introduction

    The Serpent Cobra E-Truggy in RTR trim is a perfect basher sort vehicle that'll simply take numerous beating and its in addition a good package to begin with genuine race ! In line with the Cobra E-Truggy it is the outright price, great management, dependability, rigidness and durability you might need.

    The RTR package is actually dialed:
    - factory develop racing framework
    - prepainted and precut low type truggy body and big composite back wing
    - premounted truggy tyres/wheels/inserts
    - pre-set 4S waterproof 150A speedo ( DragonRC)
    - 2000kv brushless longbody engine (DragonRC)
    - electronic 2.4ghz transmitter (DragonRC)
    - metal gear servo 16kg ( DragonRC-Savox)
    - 3 oilfilled geardifferentials
    - Big bore shocks with synthetic dustboots and machined aluminium shocktowers
    - Spring metal transmission elements and turnbuckles, front side and rear cvd driveshafts
    - Front and back anti-roll bars
    - big battery-cases with effortless felcron straps
    - Machined aluminium chassisplate
    - totally ballraced
    - Batteries the car and transmitter aren't included

    The bodyshell will come in orange, red, green, blue and red, and a certain sort.

    Serpent provides many optional components as a result vehicle to enhance performance, lighter if not for additionally nicer appears.

  • Available in 4 colors:
    600039-O Serpent Cobra E-Truggy RTR orange
    600039-R Serpent Cobra E-Truggy RTR red
    600039-B Serpent Cobra E-Truggy RTR blue
    600039-G Serpent Cobra E-Truggy RTR green

  • Main features

    vehicle
    entirely expert pre produce and pre-set framework and gadgets.

    Transmitter
    DragonRc 2.4 GHz steeringwheel kind transmitter with lots settings and good range. Comes with little and light receiver.

    Speedo
    DragonRC waterproof speedcontroller with a massive 150A capacity to handle the brushless engine and 4S battery power

    engine
    DragonRC longbody 2000kV brushless motor with effortless colorcoded connectors

    Body
    Prepainted and pre-cut low e-Truggy human body, in 4 primary colors orange, red, Green and Blue. ( additionally clear one available as optional)

    Tyres
    Premounted battle prepared tyres / tires with soft substances and pintype profile for incredible hold.

    Chassis
    extremely slim 3mm 7075T6 aluminium framework, with machining in the top face to make it lighter in strategic places and also to get a handle on flex. Kick-up front side for appropriate landings. Angled part to increase cornering approval, and protected and simple mounting side guards with 5 screws. Countersunk holes, pouches to position the suspension system brackets. Broadly speaking the Truggy is built to keep carefully the fat really main and nearby the centerline that one may, to produce an incredible general balance.

    Side guards / battery pack trays
    Durable shaped composite side guards / battery power trays that stay glued to the kind of the framework, and mount with 5 screws each side. Front and sides sufficient to keep the dirt straight down. The guards/trays create lots of protection. The batteries are set up in longtudinal fashion, maintaining the extra weight suprisingly low in automobile. The battery power trays features user-friendly Serpent marked felcron TM straps to secure the batteries in position. Fits 2S and 3S batteries.

    Motormount:
    The engine is invest numerous optimal destination inside automobile, keeping motor-forces and transmission elements / alignment at heart. Simply one-screw is needed to secure the BL motor, on nicely produced durable machined aluminium motormount. Region for additional motor-cooling available as required. The room the motor allows mounting all popular buggy and (monster)truggy engines.

    Composite framework braces
    Allows the framework to flex which assists improve bump administration. Front and right back.

    Front bumper
    well curved front bumper, the same as concerning the Cobra buggy, to shield the best anti-roll club, suspension system brackets, and moves inline with kick-up framework front part for safe landings.

    Front suspension system system system
    lengthy and durable composite reduced wishbones, along with top spring-steel trackrods. 2 reduced shock-mount jobs. Downstops may be employed as needed. Pivotball kind anti-roll club rods.
    .
    Front steering / servo saver / angled
    Revolutionary angled front side steering installation to reduce the angle of difference in the middle of your total caster and steering airplane. Therefore you ought to have less bump steer and a truer steering Ackerman through the complete array of suspension.

    Adjustable springtime packed servo-saver system with interchangeable Ackermann meals. Combined with design regarding steering bell cranks whenever changing the Ackerman you won't should adjust your steering tie rods. You simply will simply have to adjust your end points on your own radio.. a piece of cake to get involved with and set-up.

    The Inboard Bell crank keeps the lever and linkage inside car. It can benefit along with the avoidance of dilemmas the steering system. Zero scrub radiuses on steering knuckle, assists in reducing the jacking effect created by your steering knuckle offset. It offers an even more direct fell while maintaining the cars framework more level while turning.

    the leading roll center are changed quickly by going the steering knuckle shims using appropriate places.

    Topped of with a good composite top-plate.

    Front steering-block / c-hubs
    incredibly durable front part steeringblock / C-hub installation .

    Drive-shafts
    much longer and lightweight springtime metal products with pressed in steel pins, laser-engraved. Exact same size front side and rear.

    Wheel-axles / wheel-nut
    Serpent springtime steel threaded wheel-axles with lightweight grey anodised aluminium wheel-nuts to help keep the massive truggy wheels/tyres on program.

    Captured universal bones
    Guarantees you can complete a race without loosing a pin or set screw. All elements, axles and drive train elements have capture pins

    Front shocktower
    Light, strong and durable machined 5mm aluminium services and products with 5 jobs for shockangle.

    Shock-set front component and straight back
    16mm big bore shocks, with hard anodized precision threaded shock-bodies. Shockboots in silicone synthetic to hold the dirt away . Chromed shock-shafts for supersmooth shockaction . The larger o bands provide less basic anxiety and a greater seal without dragging inside shock shaft.

    Suspension brackets
    The hinge-pins / hingepin balls are captured in durable composite suspension system system system brackets . These capture the nylon roll-center inserts.

    Anti-roll club / anti-roll club linkage with pivotball
    The anti-roll pubs front and straight back are made of good unique springtime steel, and they are captured inside diff-cased in ballbearing for perfect guidance and control.

    Receiver package / servo mount / speedo mount
    Composite one piece radiobox to firmly install servo� s, speedo and receiver. For optimum security the light receiver fits the top-case effortless, with a little opening to allow cable to protrude. The speedo seats suprisingly low on a plate just over the framework, for that reason quick cables lets you the motor. The servo is set up in a vertical fashion.

    Central diff
    Optimised primary gear-diff with 50T super-hard spur-gear . Smaller, compact design to lessen rotating mass towards the maximum.

    Transmission shafts
    Durable but light and slim Serpent springtime metal, laser etched shafts.

    Front and right back diff
    Optimised gear-diff with superhard spur-gears . Smaller, compact design to minimize rotating mass towards max. Same variation front part and right back. Diff coupler in springtime steel seated in large barings for durability.

    straight back shocktower
    Light, strong and durable machined 5mm aluminum item with 5 functions for shockangle.

    Rear uprights
    Durable composite back uprights with 3 camber functions

    Suspension brackets right back
    Durable composite products with eccentric inserts to alter set-up.

    back wing mount
    The composite back wing mount, enables to improve the angle linked to back wing.

    Back wing
    Two period high down force wing, has two samples of angle, that also includes 2 fins. Helps improve down force and right line capability

    Bodymounts
    Nylon bodymounts with wider sitting your body, firmly fastened on shocktowers.

    Super minimal profile e-Truck Body
    Enhances appearance additionally keeps the profile minimum. Comes precut and prepainted.

    Decals
    placed on the body.

    Oils / oil
    vehicle is develop with a high quality silicone oils the diffs and shocks and black colored colored oil. Threadlock used in which required.

    Handbook
    color manual showing the car, specifications, tips and exploded views. The transmitter and speedo have little split manuals included.

    Box
    color protective package to re-use for car transport or tyres.





Copyright © 2008-2024 rcjaz.co.uk All rights reserved