Serpent 803195 1/10 Aluminium Pinion Gear Set - Precision Tuning Pack  [SER803195]

Serpent SER803195 Gear Pinion set 1/10 (6)
Price:
£30.81
Brand:
Serpent
Model:
SER803195
Please kindly input your name and email address, we will inform you once we have the restocking.
Write a review

Precision Pinions for Serpent 1/10 Tuners

For owners of Serpent 1/10 200mm models the Serpent 803195 pinion set provides a compact selection of coated aluminium gears for fine tuning drive ratios. The kit is useful for setup changes during practice or when adapting to different circuits.

Wide Range of Tooth Options

The pack includes pinions with 17T, 18T, 20T, 21T, 22T and 23T, giving a broad spread to alter acceleration and top speed. Each pinion is produced from coated aluminium to strike a balance between lightness and durability.

Engineered for Regular Use

With a protective coating to help limit tooth wear, these pinions are suitable for drivers who frequently change gear ratios. They are intended to retain consistent mesh and performance under typical racing stresses.

Specifications

  • Material: Coated Aluminium
  • Compatibility: 1/10 Scale Models
  • Tooth Counts: 17T, 18T, 20T, 21T, 22T, 23T

A practical set for competitors and tuners who need reliable, easy-to-swap pinions for their Serpent 1/10 cars.

How do I confirm these will fit my motor?

Measure your motor shaft diameter and spline count and compare with the pinion dimensions. If those match, the pinion should fit securely with the correct grub screw torque.

Can I change pinions between heats?

Yes, swapping pinions is common to suit different track conditions. Keep a small tool kit and spares to speed up changes between qualifying runs or heats.

What indicates a worn pinion?

Look for rounded or chipped teeth, excessive backlash, or noisy mesh. Replace the pinion if tooth profiles are degraded to avoid damaging the spur gear.

Which gear mesh setup works best?

Aim for a small clearance using paper or mesh paste to set the mesh. Too tight causes binding, too loose increases wear and noise.

Does the coating affect fit or torque?

The coating is thin and should not affect fit. Apply recommended torque to the motor set screw and recheck after a few runs to ensure nothing has loosened.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved