Serpent 804353 Carbon Front Rim Covers for Natrix 748 - Precision Fit  [SER804353]

Serpent SER804353 Rim Cover Front 748 (2)
Price:
£23.79
Brand:
Serpent
Model:
SER804353
Condition:
Brand New
Write a review
alt="Serpent SER804353 Rim Cover Front 748 (2)" title="Serpent SER804353 Rim Cover Front 748 (2)"

Improve front-end response on the Natrix 748

Enhance your Serpent Natrix 748 with the Serpent 804353 carbon front rim covers to achieve firmer steering feedback. These carbon pieces attach to uprights and steering blocks to reduce undesirable flex under load.

Compatibility guidance

The Natrix 748 is configured to accept these covers easily. For Natrix 747 owners, fitting the 748 steering blocks and uprights will allow the Serpent 804353 covers to be used as a direct swap, enabling the handling upgrade.

Practical track effects

When grip varies during a run, these covers help keep steering input consistent and improve mid-corner stability. Drivers seeking more repeatable turn-in and easier setup changes will find them helpful.

How do these covers affect front-end tuning?

They increase local stiffness around the hub area, which can reduce tuning sensitivity. Expect to fine-tune roll centres and steering rates after fitting.

Is any trimming required before installation?

Most installations are plug-and-play, but check for paint or excess material on uprights that might stop a flush fit and lightly clean contact areas if required.

Can these be used with alloy uprights?

They are designed for the 748 geometry; compatibility with alloy uprights depends on matching mounting surfaces. Verify dimensions before fitting to non-standard uprights.

Do they require special care or maintenance?

Inspect for cracks after heavy impacts and keep mounting points free of debris. Carbon covers are robust but should be checked periodically for secure fitment.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved