SER903019 Serpent Serpent VIPER 989 40th anniversary 1/8 GP [SER903019]

Serpent SER903019 Serpent VIPER 989 40th anniversary 1/8 GP

Price:

£591.06

Brand:

Serpent

Model:

SER903019

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
R/C Models - On-Road - Touring Cars - Nitro Powered category

Write a review

alt="Serpent SER903019 Serpent VIPER 989 40th anniversary 1/8 GP" title="Serpent SER903019 Serpent VIPER 989 40th anniversary 1/8 GP"

Description

Serpent has released VIPER 989 40th anniversary GP in 1/8 R/C Models AWD drivetrain assembly kit under Nitro Powered On-Road Touring Cars category

The cable type front component anti-roll club is ball raced. You can change and adjust due to the open front side end design. The standard wire is 2.5mm and 2 optional thicknesses can be seen. The pivot ball link system directs the suspension system movement towards the club and enables effortless tweak modification.
The steering obstructs are attached to the arms with springtime steel 8.5mm pivot balls, which run actually smooth and well protected in nylon cups, and generally speaking are a facile task to modify with a 2.5 hex unit.
The ultra-narrow keeps the improved flex faculties. The framework is milled lower in less load-stressed areas making this because light feasible but nevertheless remain rigid in areas by which needed.
Of system we kept the first way of include lots, efficiently adjustable inside’s and the means it is it mounted to minimize vibrations by using a carbon fat connection which will be setup in anti-vibration rubbers.
On the top of we have added the opportunity to add a sliding fat right inside front part, put up on a carbon connection. It assisted a significant amount while we are avoiding traction roll and fine-tuning the administration the 989
The new midshaft construction features a brand new block. This is really built to go the shaft somewhat ahead. The best gear therefore became 210mm very long as opposed to 213mm
This happen done to utilize the sidebelt with only one gear tensioner as opposed to the 2.
due to this the transmission will probably be more free.
The trunk fingers function carbon inserts as utilized by the group within Worlds
The front hands in 989 40th anniversary kits would be the open style arms concerning the 977, clearly utilizing the extra mounts the heave brackets
At the globes the group furthermore preferred another bumper. It's less steering set alongside the 989 bumper but provided a consistent feeling.
If more steering at high rate becomes necessary, it is always perhaps to utilize the 989 bumper
Another intent behind this kit would be the “option 2” steeringlevers. These provide a new ackerman for a smother, more linear feeling towards steering
Complete fresh front component springs with another price and progressiveness may also be element of this kit
2.5mm dense radioplate, since used by the group. A bit less steering but more constant under high hold circumstances
Another treatment for adjust flex that has been effectively employed by the group is a fresh extra bracket alongside the servosaver
7075 T6 Aluminium 5mm framework meal
The 5mm aluminium framework has perfect symmetrical type even for flex and fat distribution. The ultra-narrow framework is quite light, whilst it nevertheless remains strong in critical places. The Viper 989 logo design is laser etched.
Rather than the 977 bumper, the 989 bumper may be used plainly. It offers more steering at high-speed but it really comes with a little more “nervousness”
The steering obstructs, which are equal left and right, offer a very important factor to improve the axle destination to a “trailing” or “leading” spot, alongside power to replace the kingpin-inclination and offset. This permits many alternatives to fine tune steering security for most stages the corner. The steering block features an aluminium meal for in touch the springtime metal track-rods. They have 2 Ackermann choices along side a option 2 lever.
Optional carbon fibre disks are arranged about the medial part linked to steering obstructs and uprights for aerodynamic alterations.
The long durable front side side reduced wishbones would be the open-style arms just like the 977. An aluminium shock mount dish is screwed on paid wishbone. This permits the shock accessory mention be placed further outwards increasing surprise movement. Leading paid off fingers are installed on front side brackets with nylon holders. The kit includes 2 versions: in and away. This method additionally allows simple and fast front drive shaft upkeep.
obviously the 988 closed hands are usable as well
The left and appropriate interchangeable top hands are installed with 3 place nylon suspension system system pin inserts. The 3 spot inserts help camber-change alterations and they're held in place by the anodized aluminium top brackets. Underneath the top brackets, spacers lets you change their angle or height. Caster is modified with videos into the upper pivot pins. Comparable videos may put on the paid off pivot pins to boost wheelbase.
The black colored anodized aluminium front side axle has Japan made one-way bearings. Spring steel drive cups relate to the long and thin spring-steel drive shafts with CVD system. The ball raced spring metal wheel axles have really in fact aluminium quick-change levers. The available front end design allows quickly and easy eradication of the leading axle and driveline components.
The main mounted seervosaver enables simple and easy fast Ackermann modification. The servosaver features a greater mounted insert which can be within 3 jobs. Another 2 Ackermann roles can be obtained concerning the steering obstructs.
The tail construction with aluminium brackets is a very available design, which allows for effortless of upkeep and cleansing. Dis-assembly calls for removing just a couple of screws. Replacing a belt if required, is a simple task. The eccentric bearing holders in to the backside shaft allow modification of belt anxiety. The whole tail is eradicated as you product through framework by reduced total of some screws.
The cable type right back anti-roll club is ball raced. It is installed in back bearing obstructs and is quite simple to boost and adjust. The standard cable is 2.5mm and 2 optional thicknesses can be had. The pivot ball website link system directs the suspension system movement on club and enables simple tweak adjustment.
The slim solid straight back axle in Serpent springtime steel has a lightweight 9mm wide 48T pulley. The axle has a double slot the driveshaft pin for lightness and durability. Spring metal, CVD type, drive shafts link the trunk shaft to spring metal wheel-axles with aluminium quick-change levers. A tremendously durable and long lasting drivetrain.
The fresh backside reduced wishbones have a hollow style design with shut bottoms for aerodynamics and split top mounted moulded dishes. The lower straight back hands support the hyperlink the rear anti-roll club and also the aluminum mounting full bowl of a sizable part shocks. This meal moves the shock mounting place towards outside for improved geometry. Nylon videos are employed regarding paid off straight back pins to enhance wheelbase.
The durable composite uprights offer the ball raced wheel axles, with aluminium quick-change levers. On up-right spacers is added in pivot ball to improve roll centre and camber modification.
Optional carbon fibre disks are linked to the part of uprights for aerodynamic reasons. A corner uprights are for this hands with springtime steel 8.5mm pivot balls, which operate really smooth and well protected in nylon cups, and generally are really easy to adjust with a 2.5 hex device.
The adjustable rear top camber links mount to a 4 location back carbon fibre camber dish.
The trunk floating human body mount that's set up in the up-rights with 2 hands is centred by a carbon-fibre and steel guider. The mount has 4 roles for each component available, according to human anatomy shell utilized and traction available. The threaded holes at a time of the body mount provde the choice to include further body-supports
- 4wd belt-driven battle vehicle
- Serpent springtime steel axles with quick modification system the tires
- Front and back springtime steel cvd shafts
- NSK bearings the transmission
- minimal friction belts and ball raced belt-tensioner
- Ebony anodized front shaft with one-way bearings and slim straight back solid axle
- super low inertia 2-speed gearbox
- separate suspension with hydraulic low-friction shock absorbers
- Ball raced forward and straight back anti-roll bars
Optionals
a sizable range of optional elements are must further improve performance, price, weight and seems.
www.serpent/com/903019
Communications
- site
- Promopage
- Facebook web site
- Viper 988 Twitter person group
- Serpent Advanced individual Manuals pages
- YouTube video’s
- Online set-up sheets
- Support from distributors, dealers and team motorists all over the world
Merchandising
an ideal selection of tops, sweaters, coats, caps, bags, tools and decals.
Design
Serpent Viper 989
created by Michael Salven.
With great help from all team-drivers and 988/977 motorists!
The kit include a couple of extra's:
1 computer Serpent Pit Mat 40th anniversary
www.serpent.com/1904
Serpent Rugsack 1/8 www.serpent.com/1906

Hot Brands

SER903019 Serpent Serpent VIPER 989 40th anniversary 1/8 GP [SER903019]