Slow-Flyer 12x4.7SF APC AP12047SF Propeller Replacement  [AP12047SF]

APC PROPELLER 12x4.7SF ELECTRIC SLOW FLYER
Price:
£3.83
Brand:
APC
Model:
AP12047SF
Condition:
Brand New
Write a review

Overview of this slow-flyer prop

This APC AP12047SF propeller is supplied as a 12x4.7SF replacement for electric slow-flyer aircraft. It is intended for installations that call for a moderate diameter and low pitch to support calm cruise and easy low-speed control.

Fitting is uncomplicated: use the aircraft's current prop adapter, spinner or nut arrangement and follow the airframe manufacturer's fastening instructions. Check thread direction, apply correct torque and ensure spinner clearance before flight. Balance the propeller on a balancer or by carefully trimming to reduce vibration and protect the motor bearings.

In tuning terms the 4.7 pitch prioritizes controllable climb over top-end speed on light electric setups. Switching to a different diameter or pitch will alter RPM, thrust and current draw, so always confirm ESC and motor limits during initial testing flights.

How will this prop affect my model's thrust and handling?

The 12x4.7SF size means moderate thrust with a low pitch; expect steadier low-speed handling and improved climb control, but a lower potential top speed.

What preflight checks should I do after installing this prop?

After mounting with your existing adapter or spinner, verify thread direction and clearance, torque to spec and balance the prop. Conduct a ground power check while observing amp draw and vibration before full flight.

Is additional electronic tuning needed when changing to this prop?

Possibly. Changing diameter or pitch can change RPM and current consumption; monitor ESC and motor temperatures and adjust throttle or gearing as needed to stay within component limits.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved