Tamiya 1/14 King Hauler and Ford Aeromax 153mm Alloy Main Drive Shaft TRU153 Upgrade by GPM  [TRU153]

Tamiya 1/14 Truck King Hauler /Ford Aeromax Alloy Main Drive Shaft (153mm) - 1pc - GPM TRU153
Price:
£9.54
Brand:
GPM
Model:
TRU153
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Key features and compatibility

This 153mm alloy main drive shaft is manufactured for Tamiya 1/14 Truck King Hauler and Ford Aeromax models, supplied as 1 pcs. It replaces the OEM shaft to offer a more robust rotary connection from gearbox output to the driveline, useful for scale truck builds and tuning work.

Fitment is limited to the listed Tamiya 1/14 platforms; confirm gearbox spline count and shaft seating dimensions prior to installation. As an aftermarket alloy part, it is intended to be used with the vehicle's existing couplings, bearings, and retaining hardware.

Installation guidance: support the gearbox while removing the old shaft to prevent misalignment, recheck pinion and spur mesh after fitting, and ensure minimal runout. Maintenance should include regular spline inspections and lubrication of contact areas to lessen wear. This item is intended solely for hobby RC use.

Does this replace the stock shaft directly?

Where the truck uses a 153mm shaft with the same spline pattern this is a direct aftermarket replacement, but always verify spline count and seating measurements first.

Any special tools needed to fit it?

Standard hand tools for gearbox support and shaft removal are usually sufficient; take care to support the gearbox and check alignment as you refit the shaft and associated hardware.

What signs indicate replacement is needed?

Look for visible spline wear, deformation, or excessive play in the driveline. If you notice vibration or poor mesh after fitting, inspect the shaft and mating parts and replace as required.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved