Tamiya 35217 1/35 Tiger I Early Production Photo Etched Grille - Scale Detail Upgrade  [35217]

Tamiya 35217 - 1/35 Tiger I Photo Etched Grille - Early Production
Price:
£4.31
Brand:
Tamiya
Model:
35217
GTIN:
4950344997015
Condition:
Brand New
Available in warehouse
Write a review

Authentic engine deck grilles from Tamiya for Tiger I modellers

The Tamiya 35217 1/35 Tiger I Photo Etched Grille is a targeted upgrade for those enhancing early production Tiger I kits. The etched metal sections accurately mimic the grille patterns used on the real tank, adding convincing texture and small scale shadowing to the build.

What makes photo etch a preferred choice

Photo etch yields finer edges and thinner sections than injection molded parts, allowing for lifelike openwork and crisp grille lines. The Tamiya 35217 pieces are ideal where scale accuracy around vents and engine covers matters most.

Assembly notes and best practice

Remove parts from the fret with care and deburr attachment points before shaping. Use a light touch when forming the metal and check alignment frequently to ensure the grille sits true to the hull contours.

Specifications

  • Scale: 1/35
  • Material: Photo etched metal
  • Assembly: Requires cutting and shaping
  • Compatibility: Designed for early production Tiger I models

Do these grilles need special preparation before gluing?

Lightly sand or file the attachment points to remove burrs and ensure glue bonds cleanly. Clean parts of oils with isopropyl alcohol before applying adhesive.

Will the etched grilles survive weathering techniques?

Yes. Use thin washes and careful drybrushing to age the grille without obscuring the fine detail. Avoid heavy pigment applications that can fill the gaps.

Are replacement parts available if I damage a grille?

Spare parts availability depends on stock from suppliers. Check specialist aftermarket dealers for single-piece frets or similar items while handling parts carefully to reduce breakage risk.

Should I fit these before or after painting the hull?

Most modellers fit and secure the grilles first, then prime and paint the combined area to ensure a consistent finish and avoid paint lifting at joints.

Any advice for storing unused etched parts?

Keep unused frets flat in a rigid envelope or container to prevent bending. Label packs so you can identify parts quickly when you return to the project.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved