Tamiya 40123 GB-01 Replacement Screws 2.6x18mm (5)  [40123]

Tamiya 40123 - 2.6x18mm Screw (5Pcs) For GB-01
Price:
£1.40
Brand:
Tamiya
Model:
40123
Condition:
Brand New
Write a review

GB-01 Chassis Replacement Screws

The Tamiya 40123 2.6x18mm screws are specified for GB-01 chassis fastenings and provide the right fit for common mounting points. These screws are supplied in a five piece quantity for repairs.

Routine Checks and When to Replace

Frequent inspection of fasteners prevents failures in the field. Replace any Tamiya 40123 screw that shows deformation, rounding, or a loose fit to maintain reliable chassis assembly.

Assembly and Torque Recommendations

These screws are designed for direct replacement on GB-01 parts. Use a suitable driver and tighten until seated; avoid over-tightening which can harm threads or connector parts.

Will these screws fit if my original is 2.6mm but different length?

The 40123 is 2.6x18mm; if your original is a different length, it may not be suitable. Always match both diameter and length for safe assembly.

What driver should I use for best control?

Use the correct sized screwdriver bit to avoid rounding the head and to apply even torque during installation.

How do I clean threads before reuse?

Remove dirt and old threadlocker with a brush and some solvent, then inspect the threads for damage before reinstalling or replacing the screw.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved