Tamiya 51326 Bevel Gear Set for Toyota Land Cruiser 40 CR01 [51326]

Tamiya 51326 - RC CR01 Toyota Land Cruiser 40 - Bevel Gear SP-1326

Price:

£10.97

Brand:

Tamiya

Model:

51326

GTIN:

4950344513260

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the

Spares / Hop-ups - Tamiya - CR-01

Tamiya 51326 Bevel Gear Upgrade

The Tamiya 51326 Bevel Gear Set is intended for the CR01 Toyota Land Cruiser 40 and swaps standard components for sturdier aluminium parts to reduce wear and maintain reliable differential action.

Package Contents

Two large bevel gears
Three small bevel gears
One differential case
One bevel gear mounted on shaft
One e-clip
Two 9.5 x 14.8mm washers
One 5 x 7mm picnic washer
One set screw
Three 2 x 3.5mm socket head screws

Fitment Recommendations

Assemble on a tidy work area and confirm gear alignment before tightening. Use appropriate lubrication on contact surfaces and recheck screw tightness after a short test run.

Is professional installation required?

Most hobbyists can fit the kit with common tools and basic experience; if unsure, consult a workshop or an experienced builder for guidance.

Will aluminium gears affect weight distribution?

Aluminium parts are slightly heavier than plastic but the change is minimal and usually improves durability without noticeably affecting balance.

Can I use these gears for off road running?

Yes, the aluminium construction handles off road stresses better than standard parts, though regular inspection after harsh use is advised.

Do the gears change gear ratios?

The kit keeps the original tooth counts and ratios, so there is no change to gearing; the upgrade focuses on strength and wear resistance.

What should I check after the first run?

After the initial outing, recheck screw tightness, look for any unusual wear, and confirm the differential runs freely with the chosen lubricant.