Tamiya 53546 Setting Spring Set for TGM-02 Precision Setup  [53546]

Tamiya 53546 - Setting Spring Set TGM-02 OP-546
Price:
£13.61
Brand:
Tamiya
Model:
53546
Condition:
Brand New
Write a review

Refine Your TGM-02 with the Tamiya 53546 Spring Set

The Tamiya 53546 Setting Spring Set gives clear options for tailoring suspension behaviour on the TGM-02. It is a handy kit for fine tuning handling without complex mods.

What Each Spring Does

The kit contains three colour coded springs to match ride demands. Green springs are the soft option, red springs are mid-range, and yellow springs are the firmest. Choosing between them helps manage body roll, traction and chassis balance on different surfaces.

Fitment Notes and Measurements

These springs are produced for the Tamiya TGM-02 and are simple to fit to its shock units. They are 76mm long with a 17mm inner diameter, so check these figures when considering use on other shock assemblies.

Will swapping springs alter my car balance?

Yes, changing spring rates will affect roll and pitch balance. Test one change at a time and adjust sway bars or shock damping if needed to restore handling balance.

Can I mix spring colours front and rear?

You can mix rates between front and rear to tune understeer or oversteer, but make small incremental changes and log results so you can revert if the setup becomes unpredictable.

How durable are these springs in regular use?

They are standard replacement springs designed for hobby use. Inspect for fatigue or corrosion periodically, and replace if you notice permanent sag or uneven performance.

Does changing springs require different shock pistons?

Not necessarily, but stiffer springs can benefit from heavier damping. If you find the car is too stiff or pogoing, try altering piston size or oil weight to better match the chosen spring rate.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved