Tamiya 53752 1/10 Scale Short Damper Spring for Glow Engines  [53752]

Tamiya 53752 - 1/10 Scale Glow Engine R/C Short Damper Spring OP-752
Price:
£3.81
Brand:
Tamiya
Model:
53752
Condition:
Brand New
Write a review

Front Suspension Tuning with Tamiya 53752

If you need crisper front-end control on a 1/10 scale glow engine RC car, the short damper spring from Tamiya provides an adjustable option to refine handling. It broadens suspension choices so racers and hobbyists can tune for different layouts.

Improved Handling Precision

The Tamiya 53752 short damper spring gives an extra-hard compression rate that increases steering responsiveness and stabilises cornering at speed, helping drivers hold cleaner lines.

Suitable Models and Installation

Specifically made for 1/10 glow engine vehicles, this short damper spring fits many common shock configurations and generally requires only standard shock servicing to fit.

Can I use this spring on vintage or classic Tamiya models?

You can fit it to older models if the shock bodies and spring seats match modern dimensions, but verify fitment before altering valuable or rare kits.

How should I adjust damping with this spring?

Stiffer springs often require slightly heavier shock oil or reduced rebound to keep the suspension controlled. Test on track and adjust oil weight in small steps.

Will it affect straight line stability?

A firmer front spring can increase high speed stability by reducing dive and improving weight transfer control, but balance with rear setup to avoid understeer.

Is any lubricant needed on the spring?

Springs themselves do not need lubricant, but ensure shock shafts and bushings are clean and lightly oiled to reduce friction and prevent binding.

Where should I start tuning after fitting?

Begin with factory damping settings and a couple of test runs, then tweak oil weight, preload and toe settings to dial handling to your preference.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved