Tamiya 54061 DB01 Double Slipper Performance Clutch [54061]

Tamiya 54061 - RC DB01 Double Slipper - Clutch Set - For DB-01 Chassis OP-1061

Price:

£40.23

Brand:

Tamiya

Model:

54061

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the

Spares / Hop-ups - Tamiya - DB-01

Optimize DB-01 Handling with the Tamiya 54061 Double Slipper

The Tamiya 54061 Double Slipper Clutch Set is tailored for the DB-01 chassis to give finer control over power transfer and reduce excessive wheelspin. The box contains all required parts to convert the standard slipper into a double slipper configuration.

Component Contents

DB01 Double Slipper Clutch Set Label x 1
DB01 Double Slipper Clutch Set Instruction Manual x 1
DB01 Double Slipper Clutch Set Pressure Plate x 2
54018 DB01 Slipper Clutch Slipper Pad x 2
DB01 Double Slipper Clutch Front Pulley Hub x 1
DB01 Double Slipper Clutch Rear Pulley Hub x 1
DB01 Double Slipper Clutch Rear Pulley Returner x 1
R/C Porsche Turbo RSR934 Racing Pulley Cap (Blue) x 1
TRF501X Slipper Spacer x 1
4x6x2.8mm Spacer x 1
9.0x4.1x0.5mm Spacer (White) x 1
DB01 Double Slipper Clutch Center Shaft x 1
DB01 Double Slipper Clutch Drive Hub x 1
DB01 Double Slipper Clutch Slipper Sleeve x 1
DB01 Double Slipper Clutch Slipper Spring x 1
2x9.8mm Needle Roller Pin x 1

Fitting Tips

Assemble the Tamiya 54061 Double Slipper Clutch Set with attention to spacer sequence and plate seating. Correct preload and clean assembly will yield predictable throttle response and improved mid-corner traction.

Does this replace the stock DB-01 slipper?

Yes, the kit is intended as an upgrade to the factory slipper assembly, providing an alternative double slipper arrangement for finer tuning.

Will it change gearing needs?

The clutch affects how power reaches the wheels but does not change gear ratios. You may find you can run more aggressive gearing after optimising slipper settings, depending on track grip.

What routine checks are recommended?

Regularly inspect pad surface, spring integrity and spacer condition. Clean the shaft and sleeve to avoid grit affecting engagement.

Can I return to the original slipper later?

Yes, as long as you keep the original parts. The change is reversible provided you retain the stock components and refit them in the original order.