Tamiya 54062 48 Pitch Pinion Gear Set 13T, 14T, 15T OP-1062 - Fine Tune Edition [54062]

Tamiya 54062 - 48 Pitch Pinion 13T, 14T, 15T OP-1062

Price:

£9.92

Brand:

Tamiya

Model:

54062

Condition:

Brand New

Quantity:

Write a review

Description
FAQ

Fine tune gear ratios using Tamiya 48 pitch pinions

For modelers and racers wanting precise gearing choices, Tamiya offers 48 Pitch Pinion Gears in 13T, 14T and 15T. They are geared towards refining setups on TRF501X and DB-01 chassis.

Precision steps for better setup control

Having three close-range pinions makes it simple to alter drive characteristics to suit circuit type and driver preference without major component swaps.

Included in the pack

Pinion Gears: 13T, 14T, 15T
3x3mm Grub Screws: 3 pieces
1.5mm Hex Wrench: 1 piece

Typical gear ratio outcomes

Pair these pinions with the indicated spur gears to obtain the following ratios for each chassis:

TRF501X Chassis:

13T: 16.62:1 with 96T Spur Gear
14T: 15.43:1 with 96T Spur Gear
15T: 14.40:1 with 96T Spur Gear

DB-01 Chassis:

13T: 14.39:1 with 91T Spur Gear
14T: 13.36:1 with 91T Spur Gear
15T: 12.47:1 with 91T Spur Gear

Are these pinions direct replacements for stock parts?

They are intended as drop-in 48 pitch options for the TRF501X and DB-01 but confirm shaft fit and grub screw location against your motor before final fitting.

What effect does each tooth change produce?

Each step up in tooth count raises theoretical top speed and reduces effective torque; moving down increases torque and acceleration. Choose based on track layout and battery/ motor setup.

How often should I check the pinion during a race day?

Check mesh and grub screw tightness at the start of each session and after any contact or debris incidents. Regular inspection prevents wear and potential stripping.