Tamiya 54083 TA05 Short Rev Suspension Kit Conversion  [54083]

Refined Suspension Conversion for TA05

The Tamiya 54083 Short Rev. Suspension Kit upgrades TA05 and TA05-IFS machines by fitting the 1050 bearing uprights used on the TRF416, improving mechanical efficiency and reducing body roll for more precise cornering.

What Is Included in the Kit

The box contains a full complement of parts so you can complete the suspension conversion on compatible TA05 variants:

• RCC TRF416 C Bag x 1
• TB Evo5 D Bag (Dx2) x 2
• RCC TRF416 E Bag (E) x 1
• RCC TRF416 F4 Bag (F4) x 1
• OP.587 5mm Shim Set Shim Bag (0.1mm) x 1
• OP.585 3mm Shim Set Shim Bag (0.1mm) x 1
• 1050ZZ Bearing (CN) Domestic Stock x 8
• 4mm Adjuster 2(Black) (4) x 1
• 5mm Adjuster 2(Black) (4) x 3
• 3x10mm Screw [Black Trivalent Chromate] x 3
• 4.1x11.5x1.0mm Spacer (Alu.) Not anodized x 4
• 5.5x0.5mm Setting Spacer (Alu.) x 8
• 5.5x2.0mm Setting Spacer (Blue) x 4
• 5x6.4x1.5mm Spacer (Blue) x 4
• 3x10mm Screw [Black Nickel] x 3
• 4.1x11.5x0.5mm Spacer (Alu.) Not anodized x 4
• 5.5x1.0mm Setting Spacer (Blue) x 4
• 5.5x3.0mm Setting Spacer (Alu.) Not anodized x 8
• RCC TRF414X 3x0.7mm Spacer
• 5x9mm Ball Connector (Lube Plated) x 2
• RCC TB Evo IV Flange Tube S(Black Nickel) x 2
• 5mm Ball Connector (Black) m=0 x 10
• 3x10mm Screw Set (Black ACP) x 8
• 3x8mm Screw Set (Black ACP) x 2
• 3x3mm Grub Screw (W-Point) [Trivalent Chromate] x 5
• 4.5x3.5mm Flange Tube x 2
• RCC TRF416 Wheel Axle x 4
• 2.6x22mm Stainless Shaft x 2
• 2.6x25mm Stainless Shaft x 2
• RCC TRF414M Cross Joint x 4
• 2x9.8mm Needle Roller Pin x 4
• 3x2.5mm Grub Screw (Black) x 5
• TRF414M WCR (RC Limited Ed.) Clamp type Alu. Wheel Hub x 4
• 1.6mmx4mm Cap Screw (Ni) x 5
• 2x10mm Stainless Shaft x 4
• 1.5mm Hexagon Wrench (14x45) JIS Standard x 1
• Box (New) x 1
• Instruction Manual (New) x 1

*Note: Spike shaft sold separately.