Tamiya 58748 - 1/10 Volkswagen Golf II GTi 16V Collector RC Kit (MB-01 Chassis)  [58748]

Tamiya 58748 - 1/10 Volkswagen Golf II GTi 16V (MB-01 Chassis)
Price:
£81.24
Brand:
Tamiya
Model:
58748
GTIN:
950300587483
Condition:
Brand New
Available in warehouse
Write a review
alt="Tamiya 58748 - 1/10 Volkswagen Golf II GTi 16V (MB-01 Chassis)" title="Tamiya 58748 - 1/10 Volkswagen Golf II GTi 16V (MB-01 Chassis)"

Recreate a Period Favourite in 1/10 Scale

The Tamiya Volkswagen Golf II GTI 16V kit reproduces an iconic hatchback in detailed scale, offering authentic body lines and trim. The MB-01 chassis provides a solid foundation for builders who enjoy accurate detailing and step-by-step assembly, while allowing room for performance adjustments.

MB-01 Chassis: Practical and Adaptable

Tamiya designed the MB-01 to be modular and user-friendly, encouraging setup changes without excessive complexity. The front motor with front-wheel drive mirrors the real car's layout. The chassis also permits a change to rear-wheel drive by altering gears and linkage positions, so the drive characteristics can be tailored.

Driving Characteristics and Scale Finishing

The chassis uses independent double wishbone suspension to maintain tyre contact and predictable steering on paved surfaces. The included powertrain elements reference a 540-Type Torque Tuned brushed motor and a Hobbywing ESC for dependable throttle control. The polycarbonate body and fitted moldings for mirrors and bumpers add to the model's faithful presentation.

Specifications

  • Scale: 1/10
  • Length: 383mm
  • Width: 170mm
  • Height: 138mm
  • Wheelbase: 239mm (Long)
  • Drive Type: 2WD
  • Motor: 540-Type Torque Tuned Brushed
  • ESC: Hobbywing Produced

Combining accurate styling with a chassis designed for progression, the Tamiya Volkswagen Golf II GTI 16V appeals to modellers and racers who want a realistic, adaptable RC project.

Yes. With appropriate electronics, tyres and a tuned setup, the MB-01 chassis can be prepared for club track sessions and competitive runs on smooth circuits.
You will need Tamiya PS paint or other polycarbonate-compatible paints, masking tape, a fine pair of scissors for masks and a clear coat suitable for polycarbonate shells.
Many replacement parts and hop-up options are available from Tamiya and third-party suppliers, covering common wear items and popular performance upgrades.
Begin with neutral toe and around 2-3 degrees negative camber, then trim steering endpoints to avoid oversteer. Make small incremental changes and test on your usual surface to dial in balance.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved