Tamiya 70078 3mm Model Tubing Set (10 pcs, 2mm Bore)  [70078]

Tamiya 70078 - 3mm Pipe 10pcs (Inside 2mm)
Price:
£4.65
Brand:
Tamiya
Model:
70078
Condition:
Brand New
Write a review
alt="Tamiya 70078 - 3mm Pipe 10pcs (Inside 2mm)" title="Tamiya 70078 - 3mm Pipe 10pcs (Inside 2mm)"

Practical Applications for Tamiya 70078 in Modelling

The Tamiya 70078 pack supplies ten clear tubes that suit detailed modelling and custom RC work. Each tube is 3mm on the outside with a 2mm internal bore, providing consistent, small-diameter tubing for fine tasks. They are useful for both functional and decorative installations.

Typical Uses Around the Workshop

Modellers commonly use these tubes for scale exhausts, antenna housings, wiring conduits and small structural trim. At 40cm per tube you can cut multiple pieces for several projects, making them a practical stock item.

Finishing Options and Handling Advice

The clear material takes primers and paints when prepared correctly, and it can be trimmed with hobby cutters for clean edges. Use gentle sanding and polish to restore clarity after shaping.

Yes, when cut and painted they form convincing scale roll bars and cage elements for displays and scale RC bodies.
Clamp the tube firmly and score progressively with a sharp blade or use a fine-toothed saw. A drop of cyanoacrylate on the cut end can also minimise splitting.
Use a plastic primer followed by acrylic or enamel paints. Light sanding before priming improves adhesion and finish.
Each 40cm tube offers plenty of material for several small fittings or multiple models, making the pack good value for modellers who craft often.
Store them flat in a dust-free container away from direct sunlight to prevent warping or yellowing. Keep them separated from solvents to avoid surface damage.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved