Tamiya 80030 Enamel X-20 Thinner 40ml - Precision Modelling Thinner  [80030]

Tamiya 80030 - Enamel X-20 Thinner 40ml
Price:
£2.65
Brand:
Tamiya
Model:
80030
Condition:
Brand New
Write a review

Fine Control for Enamel Paints

The Tamiya 80030 Enamel X-20 Thinner 40ml is intended to help modellers obtain an even, workable paint consistency with Tamiya enamel paints. Its size is handy for detailing or small projects.

How to Mix for Best Results

Use about 2 parts thinner to 10 parts paint to start and adapt slightly for brush work or airbrushing to reduce brush marks and improve spray uniformity.

Applications and Limitations

Works well on plastic and wood components commonly used in kits. It should not be applied directly to unprimed metal parts without an appropriate primer layer.

Can I use this thinner with old enamel paints?

Older enamels can often be revived with a small amount of thinner, but check the paint for skinning or separation and test a sample before use.

Will thinner affect adhesion to plastic?

Properly thinned enamel should adhere normally to prepared plastic. Ensure surfaces are clean and free of grease, and use primers where needed for better bonding.

Is protective equipment necessary when spraying?

Yes, use adequate ventilation and consider a suitable respirator when airbrushing enamel paints to reduce inhalation of solvent vapours.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved