Tamiya PS-12 Silver Spray Paint 100ml - Classic Polycarbonate Silver  [86012]

Tamiya 86012 - PS-12 Silver - 100ml Spray Can
Price:
£3.51
Brand:
Tamiya
Model:
86012
GTIN:
4950344988679
Condition:
Brand New
Write a review

Precision Silver Coating with Tamiya PS-12

The Tamiya PS-12 Silver Spray is intended for polycarbonate RC car bodies and produces a refined inner finish from a 100ml can. Spray in light, consistent passes from about 30cm away to build colour smoothly. Allow the initial coat to dry fully before adding a second coat to even out the finish and increase robustness.

Tips for Sharp Edges and Small Areas

For crisp masks and small decals, use Tamiya polycarbonate bottle paints to brush fine areas prior to spraying. This technique preserves detail where masking meets sprayed areas. PS-12 is formulated to resist oil and fuel contact, so it is suitable where engine exposure may occur.

If the existing paint is polycarbonate-compatible, you can overlay carefully. For differing materials, test first and ensure surfaces are clean and free of grease before spraying.
Use low-tack masking tape and build colours in thin layers, brushing small details first if needed. Remove masks between coats once paints are touch dry to prevent lifting edges.
Cool or humid conditions extend drying time, so allow longer between coats to avoid runs and ensure a smooth result. Warm, dry air speeds curing but still use light coats for best finish.

Copyright © 2008-2025 rcjaz.co.uk All rights reserved