Tamiya 86030 PS-30 Brilliant Blue 100ml Polycarbonate RC Spray  [86030]

Tamiya 86030 - PS-30 Brilliant Blue - 100ml Spray Can
Price:
£3.90
Brand:
Tamiya
Model:
86030
GTIN:
4950344988792
Condition:
Brand New
Write a review

Brighten RC Bodies with Tamiya 86030 PS-30

The Tamiya 86030 PS-30 Brilliant Blue aerosol is designed for painting clear polycarbonate RC shells and comes in a 100ml can for convenient hobby use. It gives model bodies a vivid, consistent blue when applied on the inside surface.

Spraying Method and Advice

Spray from inside the shell about 30cm away, using steady, overlapping strokes. Build the colour with light coats rather than heavy passes and allow each coat to dry before continuing to avoid sagging and uneven texture.

Safe Use and Detailing Options

This formulation resists common oils and fuels, making it appropriate for electric and nitro models. For fine graphics and trim, apply masking and finish with dedicated polycarbonate bottle paints for crisp details.

How should I store unopened cans of this paint?

Keep cans in a cool, dry place away from direct heat and sunlight. Store upright and follow the manufacturers safety instructions on the label.

What is the best way to remove paint runs if they happen?

Lightly sand the affected area after full cure, then reapply thin coats. Use a fine grit and go slow to avoid cutting through to the body.

Can I apply decals over this paint?

Yes, once the paint is fully cured you can apply decals. Consider a thin clear overcoat or decal setter for long term adhesion.

Are there recommended temperatures for spraying?

Spray in moderate temperatures, avoiding very cold or humid conditions which can affect drying. Room temperature environments give the most consistent results.

Is it possible to layer different PS colours for custom effects?

You can layer compatible PS colours to create effects, but test on a spare panel first to check colour build and adhesion before applying to a final body.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved