TAMIYA CC01 Main Gear Set 59T Spur with 13T & 16T Pinions - CC100MG by GPM  [CC100MG]

Tamiya CC01 59T / 13T & 16T Main Gear set - GPM CC100MG
Price:
£25.07
Brand:
GPM
Model:
CC100MG
GTIN:
4894538031959
Condition:
Brand New
Write a review
alt="Tamiya CC01 59T / 13T & 16T Main Gear set - GPM CC100MG" title="Tamiya CC01 59T / 13T & 16T Main Gear set - GPM CC100MG"
alt="Tamiya CC01 59T / 13T & 16T Main Gear set - GPM CC100MG" title="Tamiya CC01 59T / 13T & 16T Main Gear set - GPM CC100MG"
alt="Tamiya CC01 59T / 13T & 16T Main Gear set - GPM CC100MG" title="Tamiya CC01 59T / 13T & 16T Main Gear set - GPM CC100MG"
alt="Tamiya CC01 59T / 13T & 16T Main Gear set - GPM CC100MG" title="Tamiya CC01 59T / 13T & 16T Main Gear set - GPM CC100MG"
alt="Tamiya CC01 59T / 13T & 16T Main Gear set - GPM CC100MG" title="Tamiya CC01 59T / 13T & 16T Main Gear set - GPM CC100MG"
alt="Tamiya CC01 59T / 13T & 16T Main Gear set - GPM CC100MG" title="Tamiya CC01 59T / 13T & 16T Main Gear set - GPM CC100MG"
alt="Tamiya CC01 59T / 13T & 16T Main Gear set - GPM CC100MG" title="Tamiya CC01 59T / 13T & 16T Main Gear set - GPM CC100MG"
alt="Tamiya CC01 59T / 13T & 16T Main Gear set - GPM CC100MG" title="Tamiya CC01 59T / 13T & 16T Main Gear set - GPM CC100MG"

Key purpose and compatibility

The CC100MG main gear set is specified for the TAMIYA CC01 and names a 59T spur plus matching 13T and 16T pinions in the product title. The content concentrates on compatibility, practical tuning choices, and straightforward installation guidance for RC users.

This replacement provides the primary spur and two pinion tooth-count options so you can tailor the final drive ratio for either improved low-speed pulling or increased top speed, depending on your motor and ESC characteristics.

Fitment pointers: verify gear mesh against your motor mount spacing, secure the pinion per the motor supplier's instructions, and manually turn the drive train to check for smooth operation. Use small shims or adjust motor position to cure binding or excessive backlash.

Specifications

  • Item: Tamiya CC01 59T / 13T & 16T Main Gear set
  • Material: Not specified
  • Model Number: CC100MG
  • Compatibility: TAMIYA CC01

For CC01 owners needing the 59T spur and the listed pinion tooth counts, this set supplies the gear options to modify drive ratio; always confirm physical fit and fine-tune mesh during installation.

This item is compatible with

  • TAMIYA CC01

Can I run the larger pinion with a standard brushed motor?

Yes, but the 16T pinion can raise top speed and reduce torque, so check that the motor and ESC thermal limits and gearing match your intended use.

How do I identify correct backlash?

Aim for a small visible clearance between gear teeth under no load and ensure there is no tight spot when rotating the drivetrain; adjust with shims until rotation feels smooth.

Is gear noise likely to increase after changing pinion?

Gear noise may change slightly with different ratios; correct mesh usually minimises noise. If noise persists, recheck alignment and shaft parallelism.

Should I lubricate the gears before first use?

Light lubrication appropriate for RC gearboxes helps reduce wear, but follow common hobby practice and avoid over-applying grease that can attract dirt.

Where is the model number shown?

The model number is CC100MG and appears in the product title and specification list to help confirm you have the correct spur and pinion combination.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved