Tamiya CC02 G500 20pc Pendulum Weight and 12.5mm Hex Kit CC2023+12.5 by GPM  [CC2023+12.5]

Tamiya CC02 MERCEDES-BENZ G500 Brass Pendulum Wheel Knuckle Axle Weight + 12.5mm Wider Hex+Harden Steel #45 Front CVD Joint+Rear Drive Shaft - 20 pcs set - GPM CC2023+12.5
Price:
£49.48
Brand:
GPM
Model:
CC2023+12.5
GTIN:
4894538339246
Condition:
Brand New
Write a review
alt="Tamiya CC02 MERCEDES-BENZ G500 Brass Pendulum Wheel Knuckle Axle Weight + 12.5mm Wider Hex+Harden Steel #45 Front CVD Joint+Rear Drive Shaft - 20 pcs set - GPM CC2023+12.5" title="Tamiya CC02 MERCEDES-BENZ G500 Brass Pendulum Wheel Knuckle Axle Weight + 12.5mm Wider Hex+Harden Steel #45 Front CVD Joint+Rear Drive Shaft - 20 pcs set - GPM CC2023+12.5"
alt="Tamiya CC02 MERCEDES-BENZ G500 Brass Pendulum Wheel Knuckle Axle Weight + 12.5mm Wider Hex+Harden Steel #45 Front CVD Joint+Rear Drive Shaft - 20 pcs set - GPM CC2023+12.5" title="Tamiya CC02 MERCEDES-BENZ G500 Brass Pendulum Wheel Knuckle Axle Weight + 12.5mm Wider Hex+Harden Steel #45 Front CVD Joint+Rear Drive Shaft - 20 pcs set - GPM CC2023+12.5"
alt="Tamiya CC02 MERCEDES-BENZ G500 Brass Pendulum Wheel Knuckle Axle Weight + 12.5mm Wider Hex+Harden Steel #45 Front CVD Joint+Rear Drive Shaft - 20 pcs set - GPM CC2023+12.5" title="Tamiya CC02 MERCEDES-BENZ G500 Brass Pendulum Wheel Knuckle Axle Weight + 12.5mm Wider Hex+Harden Steel #45 Front CVD Joint+Rear Drive Shaft - 20 pcs set - GPM CC2023+12.5"
alt="Tamiya CC02 MERCEDES-BENZ G500 Brass Pendulum Wheel Knuckle Axle Weight + 12.5mm Wider Hex+Harden Steel #45 Front CVD Joint+Rear Drive Shaft - 20 pcs set - GPM CC2023+12.5" title="Tamiya CC02 MERCEDES-BENZ G500 Brass Pendulum Wheel Knuckle Axle Weight + 12.5mm Wider Hex+Harden Steel #45 Front CVD Joint+Rear Drive Shaft - 20 pcs set - GPM CC2023+12.5"

Pendulum hub weight and reinforced driveline upgrade for CC02

This upgrade kit for the Tamiya CC02 MERCEDES-BENZ G500 equips each wheel with pendulum brass weights, includes 12.5mm wider hex adaptors and supplies hardened steel driveline items tailored to slow-speed crawling and technical trail work. The pendulum weights add mass low on the hub, the wider hexes broaden track width by around 12mm, and hardened components reduce wear under heavy crawling loads.

Offered as a consolidated 20-piece kit, it is intended for CC02 chassis vehicles where improved tyre bite and vehicle stability are required over rough ground. Fitment targets wheel hub and driveline swap points and aligns with standard CC02 wheel mounting geometry.

Specifications

  • Item: 20 pcs set including pendulum weights, front CVD joints, rear drive shafts, 12.5mm wider hexes, pins and E-clips
  • Material: Brass pendulum weights, Hardened Steel #45 front CVD joints, stainless steel pins, Delrin collar bearings
  • Model Number: CC2023+12.5
  • Compatibility: Tamiya CC02 MERCEDES-BENZ G500
  • Weight: Single pendulum with bearing approximately 119 grams

Use this set to add downward hub weight, widen track for steadier behaviour on ledges, and fit hardened drivetrain parts to preserve smooth, controlled crawling on CC02 builds.

How many pendulum weights are supplied?

The set includes four pendulum wheel weights, one per corner, as part of the 20-piece package detailed in the specifications.

Do I need to change gear ratios with these parts?

No gearing changes are required; the kit focuses on unsprung mass and driveline robustness. If you see additional motor load, reassess your servo and speed controller cooling and gearing choices.

Will the hardened shafts fit straight into my CC02?

Hardened front CVDs and rear drive shafts are made to match CC02 dimensions, but we recommend checking pin diameters and shaft lengths against your stock parts before final installation.

What maintenance do the pendulum bearings need?

Inspect the bearing and Delrin collar periodically for grit and corrosion; light cleaning and fresh lubricant will keep pendulum action smooth and effective.

Copyright © 2008-2026 rcjaz.co.uk All rights reserved